Geri Dön

The effect of buckling on the interface conductance in flexible lithium-ion batteries

Başlık çevirisi mevcut değil.

  1. Tez No: 402515
  2. Yazar: AHMET AKTÜRK
  3. Danışmanlar: DR. HALEH ARDEBILI
  4. Tez Türü: Yüksek Lisans
  5. Konular: Makine Mühendisliği, Mechanical Engineering
  6. Anahtar Kelimeler: Belirtilmemiş.
  7. Yıl: 2015
  8. Dil: İngilizce
  9. Üniversite: University of Houston
  10. Enstitü: Yurtdışı Enstitü
  11. Ana Bilim Dalı: Makine Mühendisliği Ana Bilim Dalı
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: 102

Özet

Özet yok.

Özet (Çeviri)

Flexible batteries used in flexible applications including medical implants, wearable electronics, consumer electronics or roll-up displays are often subjected to bending and buckling during their operation life. It is imperative to investigate the impact of buckling on the performance of the flexible lithium ion battery (LIBs). In this study, flexible thin-film lithium ion batteries based on solid nanocomposite polymer electrolyte were fabricated. The interfacial impedance in fresh and cycled flexible LIBs was investigated in flat and buckled configurations using electrochemical impedance spectroscopy (EIS). It is demonstrated that with increasing value of curvatures, contact resistances between components can be reduced and contact conductance of LIBs can be enhanced.

Benzer Tezler

  1. Büyük depolama tanklarının cidar hesabı ve arayüz tasarımı

    Calculating the large storage tank shell thickness and designing of user interface

    OKAN KARABUĞA

    Yüksek Lisans

    Türkçe

    Türkçe

    2017

    Makine Mühendisliğiİstanbul Teknik Üniversitesi

    Makine Mühendisliği Ana Bilim Dalı

    ÖĞR. GÖR. ALİ İMRE AYDENİZ

  2. Korozif ortamın, grafen katkılı bazalt-cam hibrit/epoksi nanokompozit kolonların mekanik özelliklerine etkisinin araştırılması

    Investigation of the effect of corrosive environment on the mechanical properties of graphen doupted basalt-glass hybrid/epoxy nanocomposite columns

    ORHAN ERCİYEŞ

    Yüksek Lisans

    Türkçe

    Türkçe

    2022

    Makine MühendisliğiKonya Teknik Üniversitesi

    Makine Mühendisliği Ana Bilim Dalı

    DOÇ. DR. GÜROL ÖNAL

  3. Çok katlı bir otopark binasının kompozit ve çelik çözümlerinin karşılaştırılması

    The comparison between the steel and composite solutions of a parking building

    HALUK SESİGÜR

    Yüksek Lisans

    Türkçe

    Türkçe

    1994

    İnşaat Mühendisliğiİstanbul Teknik Üniversitesi

    PROF.DR. TEVFİK SENO ARDA

  4. Friction dynamics of adhesive fibrillar contact

    Adeziv fibrilli kontağın sürtünme dinamiği

    TURGAY ERAY

    Doktora

    İngilizce

    İngilizce

    2017

    Makine Mühendisliğiİstanbul Teknik Üniversitesi

    Makine Mühendisliği Ana Bilim Dalı

    DOÇ. DR. İLKER MURAT KOÇ