Geri Dön

Investigation of performance of woven fabrics produced by siro spun yarns

Siro ipliklerden üretilen dokuma kumaşların performans özelliklerinin incelenmesi

  1. Tez No: 423873
  2. Yazar: GÜLBİN FİDAN
  3. Danışmanlar: PROF. DR. ALİ KİREÇCİ
  4. Tez Türü: Yüksek Lisans
  5. Konular: Tekstil ve Tekstil Mühendisliği, Textile and Textile Engineering
  6. Anahtar Kelimeler: Belirtilmemiş.
  7. Yıl: 2016
  8. Dil: İngilizce
  9. Üniversite: Gaziantep Üniversitesi
  10. Enstitü: Fen Bilimleri Enstitüsü
  11. Ana Bilim Dalı: Tekstil Mühendisliği Ana Bilim Dalı
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: 119

Özet

Bu çalışmada, atkı yönünde kullanılan tek katlı, çift katlı ve siro eğirme teknolojisiyle üretilmiş pamuk iplikleri ve siro ipliklerin fitil bacak mesafelerinin, iplik ve kumaş kalite parametrelerine etkisi incelenmiştir. Tek katlı, çift katlı ve siro iplikler 15/1 Ne, 20/1 Ne, 25/1 Ne ve 30/1 Ne inceliklerde üretilmişlerdir. Siro ipliklerin üretimi esnasında fitil bacak mesafeleri sırasıyla 6 mm, 8 mm, 10 mm ve 12 mm aralığında ayarlanarak üretim yapılmıştır. Her iplik tipinin iplik düzgünsüzlüğü, ince yer, kalın yer, neps, mukavemet, uzama ve tüylülük özellikleri incelenmiştir. Aynı şekilde her kumaş tipinin, kopma mukavemeti ve kopma uzaması, aşınma dayanımı, boncuklanma dayanımı, yırtılma mukavemeti, hava geçirgenliği, su iticilik, kırışma açısı, buruşma dayanımı ve yanmazlık testleri yapılmıştır. Sonuçlar incelendiğinde en iyi iplik ve kumaş performansının sağlayan tek bir fitil bacak mesafesi olmadığı sonucuna varılmıştır. Genel olarak, geniş fitil bacak mesafesine sahip siro ipliklerle daha iyi iplik tüylülük ve mukavemet verileri elde edilirken; daha iyi ince yer, kalın yer, neps değerleri dar fitil bacak mesafesi ile üretilen siro ipliklerle sağlanabilmiştir.

Özet (Çeviri)

In this study, single, plied and sirospun cotton yarns and fabrics, which obtained by using these yarns in weft direction, were examined to analyze the effects of strand spacing on quality parameters of sirospun yarns and fabrics. The single, plied and sirospun yarns were produced with lineer density of 15/1 Ne, 20/1 Ne, 25/1 Ne and 30/1 Ne. The strand spacing of each sirospun yarns were chosen as 6 mm, 8 mm, 10 mm and 12 mm respectively. Yarn unevenness (CV), imperfections (thick place, thin place and neps), strength, elongation and hairiness properties were analyzed for each sample of yarn. Similarly, fabric performance features such as breaking strength and breaking elongation, abrasion resistance, pilling resistance, tear strength, air permeability, water repellency, crease recovery angle, wrinkle recovery resistance and flammability tests were performed. The results show that there is no unique strand spacing that gives the best performance for all yarns and fabrics examined. Generally, sirospun yarns with larger strand space produce better hairiness and strength values but, on the contrary better imperfection values can be obtained with lower strand spacing.

Benzer Tezler

  1. Geri dönüşüm polyester ipliklerden elde edilen dokuma kumaşların performans özelliklerinin araştırılması

    Investigation of performance properties of woven fabrics produced by recycled polyester yarns

    SEMİHA KARADAĞ

    Yüksek Lisans

    Türkçe

    Türkçe

    2022

    Tekstil ve Tekstil MühendisliğiBursa Uludağ Üniversitesi

    Tekstil Mühendisliği Ana Bilim Dalı

    DOÇ. DR. GÜLCAN SÜLE

  2. Farklı elyaf tipi ve kumaş yapılarının dokuma filtrelerin performansına etkilerinin incelenmesi

    Investigation of the effects of different fiber types and fabric structures on the performance of woven filters

    AYSU İLDENİZ

    Yüksek Lisans

    Türkçe

    Türkçe

    2022

    Tekstil ve Tekstil MühendisliğiTekirdağ Namık Kemal Üniversitesi

    Tekstil Mühendisliği Ana Bilim Dalı

    PROF. DR. ÖZER GÖKTEPE

  3. Investigation and enhancement of the mechnanical properties of the fabric reinforced hybrid composites

    Kumaş takviyeli hibrit kompozitlerin mekanik özelliklerinin incelenmesi ve iyileştirilmesi

    HANDE SEZGİN

    Doktora

    İngilizce

    İngilizce

    2018

    Tekstil ve Tekstil Mühendisliğiİstanbul Teknik Üniversitesi

    Tekstil Mühendisliği Ana Bilim Dalı

    PROF. DR. ÖMER BERK BERKALP

  4. Termoplastik dokuma prepreg geliştirilmesi ve özelliklerinin incelenmesi

    Development of thermoplastic woven prepreg and investigation of its properties

    BETÜL ULUPINAR

    Yüksek Lisans

    Türkçe

    Türkçe

    2024

    Metalurji MühendisliğiMarmara Üniversitesi

    Tekstil Mühendisliği Ana Bilim Dalı

    PROF. DR. İSMAİL USTA

    DR. ÖĞR. ÜYESİ NERGİS DEMİREL GÜLTEKİN

  5. Çift özlü ipliklerden üretilen dokuma kumaşların boyama sonrası bazı performans özelliklerinin incelenmesi

    Investigation of some performance characteristics of woven fabrics produced from double yarn yarns

    SELİM BOLAT

    Yüksek Lisans

    Türkçe

    Türkçe

    2019

    Tekstil ve Tekstil MühendisliğiSüleyman Demirel Üniversitesi

    Tekstil Mühendisliği Ana Bilim Dalı

    DOÇ. DR. DEMET YILMAZ