Geri Dön

Vacsol-Aqua ile emprenye işleminin ağaç malzemenin yüzey pürüzlülüğü ve yapışma direncine etkileri

The impacts of impregnation with Vacsol-Aqua on surface roughness and bonding strength of solid wood materials

  1. Tez No: 431106
  2. Yazar: FATİH TEMEL
  3. Danışmanlar: PROF. DR. HAKAN KESKİN
  4. Tez Türü: Yüksek Lisans
  5. Konular: Ağaç İşleri, Wood Products
  6. Anahtar Kelimeler: Belirtilmemiş.
  7. Yıl: 2016
  8. Dil: Türkçe
  9. Üniversite: Gazi Üniversitesi
  10. Enstitü: Fen Bilimleri Enstitüsü
  11. Ana Bilim Dalı: Ağaç İşleri Endüstri Mühendisliği Ana Bilim Dalı
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: 50

Özet

Bu çalışma, ağaç malzemede emprenye işleminin yüzey pürüzlülüğü ve yapışma direncine etkilerini belirlemek amacıyla yapılmıştır. Bu maksatla, dış ortam şartlarında yaygın kullanım alanı olan sarıçam (Pinus sylvestris Lipsky), Uludağ göknarı [Abies nordmanniana (Stev.) subsp. bornmüllerana (Mattf.)] ve sapsız meşe (Quercus petraea Liebl.) odunlarından hazırlanan deney örnekleri, Vacsol-Aqua ile emprenye edilerek Polivinilasetat (PVAc) ve Desmodur-VTKA (Desmodur Vinil Trieketonol Asetat (D-VTKA) (D-VTKA)) tutkalları ile yapıştırılmıştır. Emprenye edilen deney örneklerinde; yüzey pürüzlülüğü ISO 4287, yapışma (çekmede makaslama) direnci ise TS EN 205 esaslarına göre belirlenmiştir. Deney sonuçlarına göre, Vacsol-Aqua ile emprenye işleminin genel olarak bu çalışmada kullanılan farklı tür ağaç malzemelerde, yüzey pürüzlülüğünü arttırdığı ve yapışma direncini azalttığı belirlenmiştir. En yüksek yüzey pürüzlülüğü değerleri emprenyeli sapsız meşe deney örneklerinde, en yüksek yapışma direnci ise D-VTKA ile yapıştırılmış kontrol deney örneklerinde tespit edilmiştir. Vacsol-Aqua ile emprenye edilmiş ağaç malzemelerde; yüzey pürüzlülüğünün az olması istenen yerlerde sarıçam ve göknar; yapışma dirençlerinin yüksek olması istenen yerlerde ise D-VTKA ile yapıştırılarak sapsız meşe kullanımı önerilebilir.

Özet (Çeviri)

The aim of this study was to determine the effects of impregnation on the surface roughness and bonding strength of different wood species. For this purpose, test specimens prepared by Scots pine (Pinus sylvestris Lipsky), Uludag fir [Abies nordmanniana (Stev.) subsp. bornmüllerana (Mattf.)] and European Oak (Quercus petraea Liebl.), which are widely used in the outer environment conditions, were impregnated with Vacsol-Aqua and were glued with Polyvinyl Acetate (PVAc) and Desmodur-VTKA Desmodur VTKA (Desmodur Vinil Trieketonol Asetat (D-VTKA) (D-VTKA)). At the impregnated test samples, while the surface roughness was tested according to ISO 4287, the adhesive bonding was tested according to TS EN 205 standard basis. As a consequence of the experimental results, although the Vacsol-Aqua impregnation has caused an increase in the surface roughness, it has caused a decrease in the bonding strength. The maximum value of surface roughness at the impregnated sessile oak test specimens and the maximum value of adhesive strength at the control samples glued with D-VTKA were determined. In the wood materials impregnated with vacsol-Aqua, in the places where the expected surface roughness is low, the usage of scots pine and fir wood is recommended while in the places where the expected bonding strength is high, the usage of sexsile oak glued with D-VTKA is recommended.

Benzer Tezler

  1. Çeşitli kimyasal maddelerle emprenye edilmiş dişbudak yapraklı üvez (Sorbus Aucuparia Lipsky) odununun bazı teknolojik özellikleri

    Technological properties of rowan (Sorbus Aucuparia Lipsky) wood impregnated with various chemical materials

    NESLİHAN SÜZER ERTÜRK

    Yüksek Lisans

    Türkçe

    Türkçe

    2011

    Ağaç İşleriGazi Üniversitesi

    Endüstriyel Teknoloji Eğitimi Ana Bilim Dalı

    DOÇ. DR. HAKAN KESKİN

  2. Değişik ağaç türlerinde yangın geciktirici kimyasal maddelerin eğilme direnci üzerine etkileri

    Static bending strenght of scots pine and beech wood preated with some preservation chemical

    HÜSEYİN PEKER

    Yüksek Lisans

    Türkçe

    Türkçe

    1994

    Ormancılık ve Orman MühendisliğiKaradeniz Teknik Üniversitesi

    Orman Endüstri Mühendisliği Ana Bilim Dalı

    PROF.DR. YALÇIN ÖRS

  3. Emprenye işleminin sarıçam ve kızılçamın bazı mekanik ve fiziksel özelliklerine etkilerinin belirlenmesi

    Determination of the effects of impregnation process on some mechanical and physical properties of scotch pine and Turkish red pine

    İZZET GÜR

    Yüksek Lisans

    Türkçe

    Türkçe

    2003

    Ağaç İşleriGazi Üniversitesi

    Mobilya ve Dekorasyon Eğitimi Ana Bilim Dalı

    PROF. DR. MUSTAFA ALTINOK

  4. Ratlarda sinir ezilmesi sonrası NGF ve Sitokrom-C'nin rejenerasyon üzerine etkisinin ışık ve elektron mikroskop düzeyde incelenmesi

    Light and electron microscope observartions of the effects on the regeneration of the NGF cytochromec following the nerve crush injury in the rat

    LEYLA CANPOLAT

    Doktora

    Türkçe

    Türkçe

    1996

    MorfolojiFırat Üniversitesi

    Histoloji ve Embriyoloji Ana Bilim Dalı

    Y.DOÇ.DR. AYSEL KÜKNER

  5. İpekböceği (Bombyx mori)'nin gelişim evrelerinde beynin histolojik açıdan araştırılması

    Histological investigation of the brain at tha developmental stages of the silkworm (Bombyx meri)

    SERAP TUFAN

    Yüksek Lisans

    Türkçe

    Türkçe

    2005

    BiyolojiEge Üniversitesi

    Biyoloji Ana Bilim Dalı

    PROF. DR. AYLA ÖBER