Metal porselen bağlantılarının saf titanyum ve bir Cr-Ni metal alaşımında incelenmesi ve karşılaştırılması
The Investigation and comparison of metal porcelain bonds in pure titanium and Cr-Ni metal alloys
- Tez No: 48976
- Danışmanlar: DOÇ.DR. CELİL DİNÇER
- Tez Türü: Doktora
- Konular: Diş Hekimliği, Dentistry
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 1995
- Dil: Türkçe
- Üniversite: Gazi Üniversitesi
- Enstitü: Sağlık Bilimleri Enstitüsü
- Ana Bilim Dalı: Belirtilmemiş.
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 80
Özet
S UMMAR Y The success of metal ceramic restorations depends on effective bonding strength between metal and porcelain. The aim of this study was to investigate the bond compatibility between porcelain and titanium which is widely used recently in metal-porcelain restorations, by using three point bending, oxide adherence and thermal expansion tests and to compare the results with those of conventional Cr-Ni alloy and porcelain system. Vita titan porcelain was used in titanium system and Vita VMK 68 porcelain was used in Cr-Ni alloy system. Three point bending test was done as DIN was measured. Later the fracture surfaces between porcelain and metal were macroscopically examined. Although the bond strength values between porcelain and metal of each group demonstrated statistically significant differences, the bending strength of all groups were found to be in the acceptable standard levels. The oxide adherence test which can give an idea of the chemical bonding of the metal porcelain restorations, was applied to titanium and Cr-Ni metal alloys with appropriate oxidation degrees. After an oxide film was formed on the specimens, tensile strength test was applied. Oxide adherence strength values were set, fracture surfaces were examined macroscopically. The results demonstrated that, although oxide adherences, adherence of the formed oxides to the metals were at a desired level. In the thermal expansion test which shows the thermal compatibility of both porcelain systems, dilotometric measurement results of the used materials system showed compressive thermal stress which is in favor of the bonding of the system and the Cr-Ni porcelain system showed tensile thermal stress which is not in favor of the bonding of the system. Proposed thermal compatibility was not seen in both of the metal-porcelain systems.-68- Her iki metal porselen sisteminin ısısal uyumluluğunun tespit edildiği ısısal genleşme testinde ise, kullanılan materyallerin dilatometrik ölçüm sonuçları belirlenmiştir. Araştırma sonucunda, titanyum metali ve porselen sisteminde bağlantının lehine olan baskı şeklinde, Cr-Ni içerikli metal alaşımı porselen sisteminde ise bağlantının aleyhine olan çekme gerilimleri oluşmuştun Her iki metal porselen sisteminde de önerilen ısısal uyum saptanamamıştır.
Özet (Çeviri)
S UMMAR Y The success of metal ceramic restorations depends on effective bonding strength between metal and porcelain. The aim of this study was to investigate the bond compatibility between porcelain and titanium which is widely used recently in metal-porcelain restorations, by using three point bending, oxide adherence and thermal expansion tests and to compare the results with those of conventional Cr-Ni alloy and porcelain system. Vita titan porcelain was used in titanium system and Vita VMK 68 porcelain was used in Cr-Ni alloy system. Three point bending test was done as DIN was measured. Later the fracture surfaces between porcelain and metal were macroscopically examined. Although the bond strength values between porcelain and metal of each group demonstrated statistically significant differences, the bending strength of all groups were found to be in the acceptable standard levels. The oxide adherence test which can give an idea of the chemical bonding of the metal porcelain restorations, was applied to titanium and Cr-Ni metal alloys with appropriate oxidation degrees. After an oxide film was formed on the specimens, tensile strength test was applied. Oxide adherence strength values were set, fracture surfaces were examined macroscopically. The results demonstrated that, although oxide adherences, adherence of the formed oxides to the metals were at a desired level. In the thermal expansion test which shows the thermal compatibility of both porcelain systems, dilotometric measurement results of the used materials system showed compressive thermal stress which is in favor of the bonding of the system and the Cr-Ni porcelain system showed tensile thermal stress which is not in favor of the bonding of the system. Proposed thermal compatibility was not seen in both of the metal-porcelain systems.
Benzer Tezler
- Porselenle metal alaşım bağlantılarının dayanıklılık yönünden incelenmesi
Başlık çevirisi yok
ZERRİN KARAALİ
- Farklı üretim teknikleriyle hazırlanmış metal alt yapılar ile üzerlerine pişirilmiş porselenlerin bağ dayanımlarının değerlendirilmesi
Evaluation of bond strength of metal substructures prepared by different production techniques and porcelaines
EBRU NUR IŞIK
Diş Hekimliği Uzmanlık
Türkçe
2017
Diş HekimliğiEge ÜniversitesiProtetik Diş Tedavisi Ana Bilim Dalı
DOÇ. DR. AKIN ALADAĞ
- Ti-Base restorasyonlarda kullanılan materyallerin diş eti hücrelerine bağlantılarının in-vitro değerlendirilmesi
The in-vitro evaluation of the adhesion of gingival cells to materials used for Ti-Base restorations
DORUK ALTIOK
Doktora
Türkçe
2025
Diş HekimliğiBaşkent ÜniversitesiProtetik Diş Tedavisi Ana Bilim Dalı
PROF. DR. SELİM ERKUT
DR. ÖĞR. ÜYESİ PELİN KILIÇ
- Metal-porselen bağlantısında, metal yüzey işlemleri ve metal-porselen birleşme açılarının etkisinin değerlendirilmesi
Başlık çevirisi yok
NURAN DİNÇKAL
Doktora
Türkçe
1983
Diş HekimliğiAtatürk ÜniversitesiProtetik Diş Tedavisi Ana Bilim Dalı
PROF. DR. M. ÜSTÜN GÜLDAĞ