Bakır, kurşun ve demir elementlerinin alevli atomik absorpsiyon spektrofotometre sisteminde düşük seviyelerde tayinlerine yönelik analitik stratejilerin geliştirilmesi
The development of analytical strategies for the determinations of copper, lead and iron elements at trace levels by atomic absorption spectrophotometer
- Tez No: 511660
- Danışmanlar: PROF. DR. SEZGİN BAKIRDERE
- Tez Türü: Yüksek Lisans
- Konular: Kimya, Chemistry
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2018
- Dil: Türkçe
- Üniversite: Yıldız Teknik Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Kimya Ana Bilim Dalı
- Bilim Dalı: Analitik Kimya Bilim Dalı
- Sayfa Sayısı: 174
Özet
Ağır metallerin birçok endüstri dalında kullanılması ile çevreye yayılımı, canlıların metallerle iç içe bir yaşam sürmesine neden olmaktadır. Bazı metallerin canlı metabolizmasında önemli fonksiyonel işlevler üstlenmesine rağmen, bazıları eser miktarlarda bile canlılar üzerinde toksik etki göstermektedir. Bu durum, farklı gıda ve çevre örneklerinde metallerin düşük derişimlerde tayinini canlı sağlığı açısından önemli kılmaktadır. Hızlı ve ekonomik bir yöntem olması sebebiyle Alevli Atomik Absorpsiyon Spektrofotometrisi (AAAS), diğer yöntemlere kıyasla daha yüksek tayin limitlerine sahip olmasına karşın, metal tayini için kullanılan en yaygın yöntemdir. Tayin limitlerinin yüksek olmasının en belirgin sebeplerinden birisisisleştiricinin veriminin düşük olmasıdır. Yapısal eksikliklerin dışında sistemin tayin limitlerinin yüksek kalmasının bir diğer sebebi de yoğun matriks etkisidir. Analitin içinde bulunduğu matriksin sinyal üzerindeki etkisi sistemin doğruluğunu ve duyarlılığını etkilemektedir. Bu çalışmada, bakır (Cu), kurşun (Pb) ve demir (Fe) elementlerinin yüksek doğruluk ve duyarlılıkta tayinlerini gerçekleştirmeye yönelikAAAS sisteminin analitik performasının arttırılması amaçlanmıştır. Bu amaç doğrultusunda; farklı önderiştirme stratejilerive sistemler birleştirilerek maksimum iyileştirme sağlanmaya çalışılmıştır. Bu tez kapsamında, bakır elementinin tayininde, bir Sıvı Faz Mikroekstraksiyon (SFME) yöntemi olan Dağıtıcı Sıvı Sıvı Mikroekstraksiyonu (DSSME) yarıklı kuvars tüp (YKT) ile birleştirilmiş; kurşun elementinin tayininde, stearik asit ile kaplanmışmanyetik nanopartikül (SA-MNP) esaslı Katı Faz Mikroekstraksiyonu (KFME) YKT birleştirilmiş; demir tayininde ise uçucu bileşik oluşturma (UBO) yöntemi kullanılmıştır. Analitler için sırasıyla DSSME-YKT-AAAS, KFME-MNP-YKT-AAAS ve UBO-AAS yöntemleri geliştirilerek bu elementlerin AAAS sisteminde eser miktarda tayinleri gerçekleştirilmiştir. Cu elementinin DSSME-YKT-AAAS yöntemi ile tayininde; analit önce önderiştirilerek matriksten uzaklaştırılmış, YKT ile atomların ışık yolunda daha uzun sure kalmaları sağlanarak atom-ışık etkileşimini arttırılması hedeflenmiştir. Çalışmada, ilk olarak labortuvarımızda salisilaldehit ve 1-naftilaminin reaksiyonundan sentezlenen 2-[(E)-(Naftalen-2-İimino)Metil]Fenol ligandı, ekstraksiyon öncesi koordine bakır kompleksini oluşturmak için kullanılmıştır. Kompleks oluşumu, ekstraksiyon ve tayin verimini etkileyen tüm parametreler, absorbans sinyalini arttırmak amacıyla optimize edilmiştir. Elde edilen optimum koşullar altında, duyarlılıkta geleneksel AAAS sisteminin analitik perfomans değerlerine kıyasla, 0.56 ng mL-1 gözlenebilme sınırına denk gelen yaklaşık olarak 192 kat artış kaydedilmiştir. En düşük konsantrasyona ait yüzde bağıl standart sapma (%BSS) %4.8 olarak tespit edilmiştir. Belirlenen optimum yöntemin doğruluğu ve uygulanabilirliğini test etmek amacıyla idrar, göl suyu ve maden suyu numuneleri üzerinde geri kazanım testleri yapılmıştır. Doğrusal çalışma aralığında bulunan dört farklı konsantrasyonda yürütülen çalışmalar sonucunda %82.2 ile %106.3 arasında geri kazanım sonuçları elde edilmiştir. Geliştirilen analitik stratejikullanılarak matriks eşleştirme yöntemi de uygulanmış ve 175 ng mL-1 konsantrasyonu için %105.14 geri kazanım değeri elde edilmiştir. Pb elementinin KFME-MNP-YKT-AAAS yöntemi ile tayininde de analit önderiştirme işlemi stearik asit ile kaplanarak yüzey alanı modifiye edilmiş manyetik nanopartiküllerin kullanıldığı KFME yöntemi ile yapılmış ve sistem YKT ile birleştirilmiştir. Ekstraksiyon öncesi, manyetik nanopartikül (Fe3O4) sentezlenip, stearik asit (SA-Fe3O4) ile kaplanmıştır. Ektraksiyon ve cihaz ölçüm parametreleri, sistemin duyarlılığını arttırmak amacıyla optimize edilmiştir. Optimum parametreler kullanılarak her analitik sistem için kalibrasyon doğruları oluşturulmuştur. Elde edilen gözlenebilme sınırı (10.28 ng mL-1) ile geleneksel AAAS yöntemine kıyasla yaklaşık 31 kat duyarlılık artışı tespit edilmiştir. Biber örneğine iki farklı konsantrasyonda standart ilave işlemi (spike) uygulanarak yapılan geri kazanım çalışmaları ile yöntemin doğruluğu test edilmiş, %102.6-106.6 arasında bulunan sonuçlar yöntemin doğruluğunu ispatlamıştır. Fe elementinin tayininde uçucu bileşik oluşturma yöntemi ile analitin matriksten ayrılması ve uçucu türevi halinde sisleştiriciye gerek duyulmaksızın tayin bölgesine ulaştırılması sağlanmıştır. Çalışmada, yöntem ve cihaz ölçüm parametreleri tek tek incelenmiş ve yönteme ait optimum parametreler belirlenmiştir. Tespit edilen optimum şartlar altında gözlenebilme limiti 236.16 µg L-1 olarak kaydedilmiş ve Fe elementinin tayininde, sistemin bir alternatif olarak kullanılabileceği görülmüştür.
Özet (Çeviri)
People live in a constant interaction with heavy metals due to their wide use in various branches of the industry. Although some metals have functional roles for vital metabolism, some have toxic effects on living organisms even at trace concentrations. Thus, determination of metals at low concentrations in different environmental and food samples is important for human health. Because of being fast and economical, Flame Atomic Absorption Spectrophotometry (FAAS) is the most commonly used method for metal determination even though its detection limits are higher than any other methods. One of the most common reasons for the high detection limits is the low nebulization efficiency. Apart from the structural deficiencies of the system, another reason of the detection limits to remain high is matrix effect. The effect of matrix on the analyte signal affects the accuracy and the sensitivity of the system. In this study, it was aimed to increase the analytical performance of the AAAS system in order to determine the copper (Cu), lead (Pb) and iron (Fe) elements in high accuracy and sensitivity. For this purpose, different preconcentration strategies and systems have been combined to achieve the highest efficiency. In this study; dispersive liquid liquid microextraction (DLLME) as a liquid phqs microextraction (LPME) method combined with slotted quartz tube (SQT) for Cu, stearic acid coated magnetic nanoparticle (SA-MNP) based solid phase microextraction (SPME) combined with SQT for Pb, and photochemical vapor generation (PVG) optimized for Fe were developed in order to determine these elements in FAAS system at trace levels. For the analytes, LPME-SQT-FAAS, SPME-MNP-SQT-FAAS and PVG-FAAS methods were developed, respectively for the determination of these elements at trace levels. In the determination of Cu by DLLME-SQT-FAAS method; the analyte was firstly seperated from the matrix by using preconcentration method, and then SQT was used to increase the atom-light interaction by ensuring that the atoms stay longer in the light path. In the study, the 2-[(E)-(Naphthalene-2-Ylimino)Methyl]Phenol ligand which was synthesized in our laboratory by the reaction of salicylaldehyde and 1-naphtylamine was used to form the coordinated copper complex before the extraction process. All parameters affecting complex formation, extraction and detection were optimized to increase the absorbance signal. Under the optimum conditions, an approximately 192 fold increase in sensitivity was recorded, corresponding to the 0.56 ng mL-1 as LOD value, comparing with the analytical performance values of the conventional FAAS system. The percent relative standard deviation (%RSD) of the lowest concentration was found to be 4.8%. Recovery studies have been carried out on samples of urine, lake water and mineral waters to test the accuracy and applicability of the developed method. As a result of the studies carried out at four different concentrations in the linear working range, recovery results between 82.2-106.3% were obtained. A matrix matching method using the developed analytical strategy was also applied and the recovery for the 175 ng mL-1 concentration was found to be 105.14%. In the determination of Pb by SPME-MNP-SQT-FAAS method; the preconcentration was carried out by SPME method using the modified surface area MNPs by coating with stearic acid. Then the extraction process was combined with SQT. Before extraction, magnetic nanoparticle (Fe3O4) was synthesized and coated with stearic acid (SA-Fe3O4). The extraction and instrumentation parameters wereoptimized to increase the sensitivity of the system. Calibration plots for each analytical systemwere established using optimum parameters. A sensitivity enhancement of about 31 times compared to the conventional AAAS method was observed with the LOD value of10.28 ng mL-1. The accuracy of the method was tested with recovery studies made with spiked two different concentrations of pepper and satisfactory results between 102.6-106.6% were obtained. In the determination of Fe, the volatile compound generation method allowed the matrix seperation and analyte to be delivered to the determinationzone without the necessity of nebulizer. In this part of the study, the method and instrument measurement parameters were examined one by one and optimum parameters of the method were determined. The detection limit for the study was recorded as 236.16 µg L-1 under the optimum conditions. It was observed that the system could be used as an alternative method for the determination of Fe.
Benzer Tezler
- İnsan ağız sütü (Kolostrum) ağır metal içeriğinin atomik absorpsiyon spektrofotometrik yöntem ile araştırılması
Başlık çevirisi yok
SADIK TURAN
- Hastalık tedavisinde kullanılan bazı meyve ve sebzelerin dokularında eser element ve mineral tayini
Determination of trace elements and minerals in some fruits and vegetable tissues which used at treatment diseases
EMİR TOSUN
Yüksek Lisans
Türkçe
2009
Eczacılık ve Farmakolojiİnönü ÜniversitesiAnalitik Kimya Ana Bilim Dalı
YRD. DOÇ. DR. F. ZEHRA KÜÇÜKBAY
- Deniz suyu ve mineral sulardaki bazı eser elementlerinin Al (OH)3 ile birlikte çöktürülerek ayrılması ve faas ile tayini
Separation of some trace elements in seawater and mineral water by coprecipitation with aluminum hydroxide and their determination by flame atomic absorption spectrometry
ASLI EGE
- Katı faz ekstraksiyonu ile zenginleştirildikten sonra bazı eser elementlerin tayini
Determination of some trace elements after preconcentration by solid phase extraction
ÖZDEN YILDIZ
- Vücut sıvıları ve üriner sistem taşlarında alevli AAS ile Pb, Zn, Fe, Mg ve Cu tayini
Pb, Zn, Fe, Mg and Cu elements are assigned with the flame atomic absorption spectrophotometer in the urinary tract stones and in the blood serum and urine examples of this patients
SERDAR SEÇKİN
Yüksek Lisans
Türkçe
2003
KimyaTrakya ÜniversitesiAnalitik Kimya Ana Bilim Dalı
YRD. DOÇ. DR. GÜLAY ŞEREN