Finite element analysis of a transparent composite armor with computational ballistic testing
Bilgisayar yardımlı balistik test ile saydam zırh analizi
- Tez No: 561994
- Danışmanlar: DR. ÖĞR. ÜYESİ ONUR CEM NAMLI
- Tez Türü: Yüksek Lisans
- Konular: Makine Mühendisliği, Mechanical Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2019
- Dil: İngilizce
- Üniversite: Yeditepe Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Makine Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Makine Mühendisliği Bilim Dalı
- Sayfa Sayısı: 90
Özet
Saydam zırhlar, koruma ve görüş açısını aynı anda sağlamak için üretilmiştir. Görüş açısı tehlikeyi fark etmede çok önemli bir unsurdur. Saydam zırhlar sayesinde hem tehlikeyi fark etmede daha etkili olunabilirken, hem de korunmanızdan feragat etmemiş olursunuz. Önemli insanların korunmasında ve askeri araçlarda bu zırhların sıkça kullanıldığını görebiliriz. Bu çalışmada, bir saydam zırh geliştirilip, bilgisayar yardımıyla analizleri ve testleri yapılıp, geleneksel zırhlarla kıyaslayarak, sonuçlar ortaya konmuştur. Sonuç elde edilirken, balistik test, tüp testi, malzemeleri birleştirme gibi teknikler kullanılarak, sonuca varılmaya çalışılmıştır. Malzeme seçimi, mermi tipi ve hızı, zırh tasarımı, saydamlık, zırh direnci gibi noktalar araştırılmış ve gerekli simülasyonlarla incelenmiştir. Mermi 7,62 milimetre çapında askeri tip seçilmiş ve test edilirken 400'den 1200 m/s e kadar birçok hız denenmiştir. Malzeme seçiminde, birçok malzeme ve kompozit test edilmiş, en uygun malzeme seçilmeye çalışılmıştır. Saydamlık ve mermiye direnç, en önemli iki unsur olduğu için bunlara uygun olan epoksi-resin kompoziti ve cam, ana malzemeler olarak seçilmiştir. Bu araştırma için, yeni bir tasarım yaratılıp, arı peteklerinden oluşan küçük tüplerin birleştirilmesiyle oluşan arı peteği modeli geliştirilmiştir. Sonuçlara bakıldığından, geleneksel modellere göre arı peteği modeli daha dirençli, daha sağlam olup, aynı zamanda ağırlık ve fiyat konularında daha düşük olduğu gözlemlenmiştir. Son tasarımın sadece ilk katmanı zarar görmüş ve mermiyi geçirmemiştir
Özet (Çeviri)
Transparent armor systems are created for combining protection with vision. Vision is important for spotting the threat. With the usage of transparent armor, threat can be detected more effectively and do not have to sacrifice safety and protection of the target which is/are threatens. Transparent armors usage is more common when there is a delicate situation like protecting important people, military vehicles etc. This study aims to develop a transparent armor, analyze and test it, and compare it with the conventional armors to see the results. Material selection, projectile type and velocity, armor design, transparency, armor impact resistance and response are some of the points, which are investigated with researches and simulation in finite element analysis. Ballistic testing, tube test, composing materials are the techniques, which, are used for determining the results. Projectile is military type 7.62 millimeters bullet and its velocity is tested between 400-1200 m/s. Several materials and composite materials are tested, in order to find the proper selection for this study. For transparency and better resistance to projectile, materials are epoxy-resin composite and float glass. A new design is created for better resistance. Honeycomb transparent armor has minimum penetration, high performance and low cost according to results, when compare to other models. At final model only the first layer is failed and do not let the bullet through. According to this result, armor is successful at stopping the bullet.
Benzer Tezler
- Temperleme işlemi ile düz camlarda montaj delikleri civarında oluşan gerilme alanının fotoelastisite yöntemi ile analizi
The analysis of stress distribution due to the tempering process by the method of photoelasticity around the mounting holes in the flat glass
CUMA UMUR DUMAN
Yüksek Lisans
Türkçe
2019
Metalurji Mühendisliğiİstanbul Teknik ÜniversitesiMetalurji ve Malzeme Mühendisliği Ana Bilim Dalı
DR. ÖĞR. ÜYESİ MEHMET ŞEREF SÖNMEZ
DR. ÖĞR. ÜYESİ OSMAN BULUT
- Çamaşır makinesi tambur arka sac tasarımı
Washing machine drum rear plate design
ONUR ATAŞ
Yüksek Lisans
Türkçe
2015
Makine Mühendisliğiİstanbul Teknik ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
YRD. DOÇ. DR. İSMAİL GERDEMELİ
- Keratokonus hastalığında insan korneasının modellenmesi ve sonlu elemanlar yöntemi ile analizi
Modeling of human cornea in keratoconus disease and analysis with finite element method
MUHSİN ÜNAL
Yüksek Lisans
Türkçe
2023
BiyomühendislikGümüşhane ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
DOÇ. DR. FİLİZ KARABUDAK
- Şeffaf plak tedavisinde kullanılan farklı ataşman tiplerinin maksiller keser dişlerdeki tork hareketine etkisinin sonlu elemanlar analizi ile incelenmesi
Investigation of the effects of different attachment types used in clear aligner therapy on torque movement in maxillary incisors with finite element analysis
PINAR HACIM MEHMEDALI
Doktora
Türkçe
2021
Diş HekimliğiSağlık Bilimleri ÜniversitesiOrtodonti Ana Bilim Dalı
PROF. DR. SERKAN GÖRGÜLÜ
- Pvdf tipi saydam piezoelektrik eyleyiciler ile dokunsal geribildirimli ekran tasarımı
Design of a haptic display with transparent pvdf piezoelectric actuators
ENES SELMAN EGE
Doktora
Türkçe
2024
Elektrik ve Elektronik MühendisliğiGebze Teknik ÜniversitesiElektronik Mühendisliği Ana Bilim Dalı
PROF. DR. ABDULKADİR BALIKÇI