The investigation of the environmental effects on composite materials
Kompozit malzemeler üzerindeki çevresel etkilerin incelenmesi
- Tez No: 672537
- Danışmanlar: Assist. Prof. Dr. SÜLEYMAN BAŞTÜRK
- Tez Türü: Yüksek Lisans
- Konular: Makine Mühendisliği, Mechanical Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2021
- Dil: İngilizce
- Üniversite: Altınbaş Üniversitesi
- Enstitü: Lisansüstü Eğitim Enstitüsü
- Ana Bilim Dalı: Makine Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 86
Özet
Bu araştırmada, kompozit malzemeler üzerindeki çevresel etkilerin bir araştırması yapılmıştır. Polimerik esaslı kompozit malzeme elle dökülerek hazırlanmış olup, epoksiden, cam elyafı ile güçlendirilmiş bir taban malzemesi olarak ve üç katmanlı ve rastgele bir yönde oluşur. Araştırma üç aşamada gerçekleştirildi. İlk aşama cam elyaf takviyeli epoksiden oluşan kompozit malzemeden numunelerin hazırlanmasıdır. İkinci aşamaya gelince, hazırlanan numuneler, numune 2'nin suya daldırılarak bir ay süreyle neme maruz bırakıldığı ve numune 3'ün bir ay 50 ° C sıcaklığa maruz bırakıldığı belirli çevresel koşullara maruz bırakıldı, Numune 4'ü bir ay boyunca 70 ° C'lik bir sıcaklığa maruz bırakarak, numune 1'i çevresel koşullara tabi tutmak. Üçüncü aşama, hazırlanan numuneler üzerinde bir sertlik, çekme, eğilme ve darbe direnci testlerinin yapılmasıdır. Sonuçlardan nem ve ısı gibi ortam şartlarına maruz kaldığında mekanik özelliklerin azaldığı gözlemlenmiş, ayrıca nemin mekanik özellikler üzerindeki etkisinin ısının etkisinden daha az olduğu görülmüştür.
Özet (Çeviri)
In this research, an investigation of the environmental effects on composite materials has been conducted. The composite material with a polymeric basis was prepared by hand casting and is consisted of epoxy as a base material reinforced by glass fibers and with three layers and in a random direction. The research was carried out on three stages. The first stage is preparing the samples from the composite material that consists of epoxy reinforced with glass fiber. As for the second stage, the prepared samples were exposed to certain environmental conditions where the sample 2 was exposed to moisture for a one month by immersing it in water, and exposing the sample 3 to a temperature of 50 °C for a one month, exposing the sample 4 to a temperature of 70 °C for a one month, while not subjecting the sample 1 to environmental conditions. The third stage is to procedure a hardness, tensile, bending and impact resistance tests on the prepared samples. It was observed from the results that mechanical properties decrease when exposed to environmental conditions such as moisture and heat, and it was also observed that the effect of moisture is less than the effect of heat on mechanical properties, as well as the temperature effect on the mechanical properties which increases when temperature increases.
Benzer Tezler
- Nanoparçacık takviyeli epoksi malzemelerin teorik ve deneysel incelemesi
Theoretical and experimental investigation of nanoparticle reinforced epoxy materials
CAN DİKİCİOĞLU
Yüksek Lisans
Türkçe
2024
Makine Mühendisliğiİstanbul Teknik ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
PROF. DR. EKREM TÜFEKCİ
- Lityum-iyon bataryaların ısıl yönetimi için şekilce kararlı kompozit faz değiştiren malzemelerin tasarımı ve performansının deneysel olarak incelenmesi
Experimental investigation of the design and performance of shaped-stable composite phase-change materials for the thermal management of lithium-ion batteries
AŞKIN YILDIZ
Yüksek Lisans
Türkçe
2022
EnerjiYalova ÜniversitesiEnerji Sistemleri Mühendisliği Ana Bilim Dalı
DOÇ. DR. MEHMET SELÇUK MERT
- Taşıt fren balatalarında katı yağlayıcı olarak grafit, molibden disülfit ve boron nitrit kullanımının frenleme performansına etkisinin araştırılması
The investigation of the effect of using graphite, molybdenum disulfide and boron nitride as solid lubricants on brake pad friction performance
HASAN ÇALIŞKAN
Yüksek Lisans
Türkçe
2023
Makine MühendisliğiMersin ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
DOÇ. DR. İLKER SUGÖZÜ
- Alüminyum/fiber tabakalı kompozit malzemelerin v bükme davranışlarının deneysel olarak incelenmesi
Experimental investigation of v-bending behavior of aluminum/fiber layered composite materials
AHMED OZAN ÖRNEKCİ
Yüksek Lisans
Türkçe
2024
Makine MühendisliğiSakarya ÜniversitesiMakine Tasarım ve İmalat Ana Bilim Dalı
DOÇ. DR. SEÇİL EKŞİ
- Uçucu kül dolgulu polimer esaslı kompozit malzemelerin ısıl ve yanma özelliklerinin incelenmesi
Investigation of thermal and combustion properties of fly ash filled polymer based composite materials
FATİH DEMİRYUĞURAN
Doktora
Türkçe
2024
Makine MühendisliğiPamukkale ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
PROF. DR. NAZIM USTA