Biyotiyol modifiye altın nanopartiküllerin metal tayininde kullanılması
Using biothiol modified gold nanoparticles in metal determination
- Tez No: 731426
- Danışmanlar: PROF. DR. PERVİN SOYLU
- Tez Türü: Yüksek Lisans
- Konular: Kimya, Chemistry
- Anahtar Kelimeler: Ağır metal tayini, Altın nanopartikül, Camsı karbon elektrot, Dönüşümlü voltametri, Grafen oksit, Heavy metal determination, Gold nanoparticle, Glassy carbon electrode, Cyclic voltammetry, Graphene oxide
- Yıl: 2022
- Dil: Türkçe
- Üniversite: Selçuk Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Kimya Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 57
Özet
Bu çalışmada, altın nanopartikül (GNP) ve poli-L-Glutatyonun (PLGSH), indirgenmiş grafen oksit (RGO) içeren camsı karbon elektrod (GCE) yüzeyine elektrokimyasal olarak kaplanmasıyla Pb(II), Cd(II) ve Hg(II) iyonlarına duyarlı yeni bir elektrokimyasal sensor (PLGSH@GNP@RGO@GCE) geliştirilmiştir. Sentezlenen bileşiklerin ve modifiye edilen elektrodların morfolojisi ve yapısal özellikleri, dönüşümlü voltametri (CV), Ultraviyole-visible spektroskopisi (UV-Vis), Fourier dönüşümlü kızılötesi (FTIR) spektroskopisi ve taramalı elektron mikroskobu (SEM) yöntemleri kullanılarak incelenmiştir. Yapılan deneyler sonucunda elde edilen sensörün Pb(II) iyonlarına karşı oldukça duyarlı olduğu görülmüştür. Bu nedenle Pb(II) iyonun yeni elektrod yüzeyinde tayini diferansiyel puls voltametrisi (DPV) tekniği kullanılarak gerçekleştirilmiştir. Bu amaçla destek elektrolit ve tarama hızı optimize edilmiştir. Pb(II) iyonunun tayini için doğrusal çalışma aralığı 8-20 µM olarak belirlenmiştir. Yapılan kalibrasyon çalışmaları neticesinde gözlenebilme sınırı ve alt tayin sınırı değerleri hesaplanmıştır.
Özet (Çeviri)
In this study, a novel electrochemical sensor for the detection of Pb(II), Cd(II) ve Hg(II) was constructed by using electrodeposition of gold nanoparticle (GNP) and poly-L-glutathione (PLGSH) onto reduced graphene oxide (RGO) on a glassy carbon electrode (PLGSH@GNP@RGO@GCE). The morphology and structural properties of the synthesized compounds and modified electrodes were investigated using cyclic voltammetry (CV), Ultraviolet visible spectroscopy (UV-Vis), Fourier Transform Infrared Spectroscopy (FT-IR) and scanning electron microscopy (SEM) methods. As a result of the experiments, it was observed that the sensor obtained was very sensitive to Pb(II) ions. Therefore, the determination of Pb(II) ion on the new electrode surface was carried out using differential pulse voltammetry (DPV) technique. For this purpose, the supporting electrolyte is optimized. The linear working range for the determination of Pb(II) ion was determined as 8-20 µM. Observability and detection limit values were calculated as a result of the calibration studies.
Benzer Tezler
- Toplam tiyol tayini için yeni bir spektrofotometrik yöntem geliştirilmesi
Development of a novel assay for total thiol determination
EMİNE MÜNEVVER GÖRÜŞÜK
Yüksek Lisans
Türkçe
2019
Kimyaİstanbul Üniversitesi-CerrahpaşaKimya Ana Bilim Dalı
PROF. DR. MUSTAFA REŞAT APAK
- Biyotiyol sensör uygulamaları hedefli çalışmalar olarak: Boranil bileşikleri sentezi
Bio-thiol sensor applications: Synthesis of Boranil compounds
SİBEL KAYA
- Antioksidanlara duyarlı soy metal nanoparçacık esaslı yeni sensörler geliştirilmesi
Development of novel noble metal nanoparticle sensors sensitive to antioxidants
NİLAY GÜNGÖR
- Biyotiyollerin tayini için altın nanoparçacık esaslı florometrik yöntem geliştirilmesi
Development of gold nanoparticle based fluorometric method for the determination of biothiols
ASUMAN ÇİFTECİ
Yüksek Lisans
Türkçe
2019
Kimyaİstanbul Üniversitesi-CerrahpaşaKimya Ana Bilim Dalı
DOÇ. DR. SALİHA ESİN ÇELİK
- Hetereosübstitüe kinonların sentez ve karakterizasyonu
Synthesis and characterization of heterosubstituted quinones
ULVIYYA NEMATOVA
Yüksek Lisans
Türkçe
2023
Kimyaİstanbul Üniversitesi-CerrahpaşaKimya Ana Bilim Dalı
DOÇ. DR. SİBEL ŞAHİNLER AYLA