Farklı resiprokal hareketli nikel titanyum eğe sistemleri ile apikalden taşan debris miktarının incelenmesi
Investigation of the amount of apical extrusion of debris with different resiprocal moving nickel titanium file systems
- Tez No: 803521
- Danışmanlar: PROF. DR. ALPER KUŞTARCI
- Tez Türü: Diş Hekimliği Uzmanlık
- Konular: Diş Hekimliği, Dentistry
- Anahtar Kelimeler: debris taşması, Niti eğe, resiprokal, debris extrusion, Niti file, reciprocating motion
- Yıl: 2023
- Dil: Türkçe
- Üniversite: Akdeniz Üniversitesi
- Enstitü: Diş Hekimliği Fakültesi
- Ana Bilim Dalı: Endodonti Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 66
Özet
Amaç: Bu çalışmanın amacı, farklı resiprokal hareketli nikel titanium (NiTi) eğe sistemleri ile apikaldan taşan debris miktarının incelenmesidir. Yöntem: Bu çalışma için 80 adet tek kök tek kanal yapısına sahip diş kullanıldı ve dişler 4 ana gruba ayrıldı (n:20). Dişler birinci grupta WaveOne Gold (WOG), ikinci grupta One RECI (OR), üçüncü grupta T-Endo Must (TEM) ve dördüncü grupta el eğesi ile prepare edildi. Prepare edilen dişlerden taşan debris, daha önce ağırlıkları hassas terazide tartılan eppendorf tüplerinde toplandı ve tüpteki suyun buharlaşması için 37 °C'de 14 gün bekletildi. Kalan debris hassas terazide ölçüldü. Tüpün önceden ölçülen boş ağırlığından çıkarılarak taşan debris miktarı belirlendi. Mann-Whitney U testi yapılarak taşan debrislerin gruplar arası analizi yapıldı. Anlamlılık düzeyi P0,05).. Sonuç: Tüm eğe sistemleri preparasyon sırasında debris taşmasına neden oldu. Test edilen tüm gruplarda en az debris taşması Grup 2'deki OR eğesinde gözlendi
Özet (Çeviri)
Objective: The aim of this study is to examine the amount of apically extruded debris with different reciprocating nickel titanium (NiTi) file systems. Material and Methods: For this study, 80 teeth with single root and single canal structure were used and the teeth were divided into 4 main groups (n:20). The teeth were prepared with WaveOne Gold (WOG) in the first group, One RECI (OR) in the second group, T-Endo Must (TEM) in the third group and using hand files in the fourth group. Apically extruded debris from the prepared teeth was collected in eppendorf tubes, which were weighed on precision scales, and kept at 37 °C for 14 days to evaporate the water in the tube. The remaining debris was measured on a precision scale. The amount of extruded debris was measured by subtracting from the previously measured empty weight of the tube. Intergroup analysis of extruded debris was performed using the Mann-Whitney U test. Significance level was accepted as P0.05). Conclusion: All file systems extruded debris during preparation. The least extrusion of debris was observed in the OR file in Group 2 in all groups.
Benzer Tezler
- Üç farklı resiprokal hareketli nikel titanyum eğe sisteminin dinamik döngüsel yorgunluk dirençlerinin karşılaştırılması
Comparison of cyclic fatigue resistance of THREE different reciprocating nickel titanium file systems
MUSTAFA ERCAN TURGAY
Diş Hekimliği Uzmanlık
Türkçe
2023
Diş HekimliğiAkdeniz ÜniversitesiEndodonti Ana Bilim Dalı
PROF. DR. ALPER KUŞTARCI
- Resiprokal hareketli ve iki farklı döner nikel titanyum eğe sisteminin kanal sökümü üzerine etkilerinin incelenmesi
Effectiveness of two different Ni-Ti rotary systems and reciproc system on retreatment
HANDE OFLAZ
Doktora
Türkçe
2013
Diş HekimliğiCumhuriyet ÜniversitesiDiş Hastalıkları ve Tedavisi Ana Bilim Dalı
DOÇ. DR. ALPER KUŞTARCI
- Farklı teknolojiler kullanılarak üretilmiş farklı çalışma prensibine sahip güncel nikel-titanyum esaslı tek eğe döner alet sistemlerinin şekillendirme etkinliklerinin karşılaştırılmalı olarak incelenmesi
Comparative investigation of shaping abilities of novel ni-ti single-file systems with different working principles produced with different technologies
UĞUR AKSOY
- Üç farklı tek eğe sistemiyle yapılan kök kanal şekillendirilmesi sonucunda dentinde oluşan mikroçatlakların taramalı elektron mikroskobuyla (SEM) incelenmesi
Examination of microfractures occurring in dentin with scanning electron microscopy (SEM) as a result of root canal shaping with 3 different single file systems
YİĞİTCAN CANDANER
Diş Hekimliği Uzmanlık
Türkçe
2019
Diş HekimliğiMarmara ÜniversitesiEndodonti Ana Bilim Dalı
PROF. DR. HESNA SAZAK ÖVEÇOĞLU
- Farklı döner eğe sistemlerinin apikalden taşan debris miktarı açısından karşılaştırılması
An in-vitro comparison of apically extruded debris using different rotary instrument systems
MELİH KAYA
Diş Hekimliği Uzmanlık
Türkçe
2016
Diş HekimliğiYüzüncü Yıl ÜniversitesiEndodonti Ana Bilim Dalı
YRD. DOÇ. DR. ÖZGÜR GENÇ ŞEN