Farklı dizaynlarda ve all-on-four konseptinde üretilen protetik altyapıların stres dağılımının sonlu elemanlar analizi yöntemiyle değerlendirilmesi
Evaluation of stress distribution of prosthetic frameworks produced with different design and all-on- four concept by finite element analysis method
- Tez No: 862147
- Danışmanlar: PROF. DR. SÜLEYMAN AGÜLOĞLU
- Tez Türü: Tıpta Uzmanlık
- Konular: Diş Hekimliği, Dentistry
- Anahtar Kelimeler: All-on-four, protetik altyapı, kafes tasarım optimizasyonu, krom-kobalt, titanyum, sonlu elemanlar stres analizi, Dental protez-implant destekli, Dental protezler, Dental stres analizi, Protetik diş tedavisi, Protezler ve implantlar, Takma diş tabanları, All-on-four, prosthetic framework, lattice design optimization, chrom- cobalt, titanium, finite element stress analysis, Dental prosthesis-implant supported, Dental prosthesis, Dental stress analysis, Prosthetic dental treatment, Prostheses and implants, Finite elements stress analysis, Denture bases
- Yıl: 2022
- Dil: Türkçe
- Üniversite: İzmir Katip Çelebi Üniversitesi
- Enstitü: Diş Hekimliği Fakültesi
- Ana Bilim Dalı: Protetik Diş Tedavisi Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: Belirtilmemiş.
Özet
Bu çalışmanın amacı, atrofik tam dişsiz bir çenede implant destekli hibrit protez altyapılarına alternatif; kafes yapılarla daha dayanıklı, daha hafif ve daha az malzeme ile üretilebilen maliyeti düşük altyapılar tasarlamak ve bu tasarımlarda oluşan stres değerlerini 3 boyutlu sonlu elemanlar stres analizi yöntemi ile değerlendirmektir. Atrofik üst çene modellemesi yapıldıktan sonra All-on-four tekniğine uygun, önde lateral diş bölgesinde aksiyal; arkada 2. premolar bölgesinde 30° distal açılı bir şekilde dört implant konumlandırılmıştır. Altyapı materyali olarak titanyum ve krom- kobalt kullanılmış olup; krom-kobalt altyapılı gruptan kafes tasarım optimizasyonuyla hücre konfigürasyonu (Body Centered Cubic, Face Centered Cubic), dış duvar kalınlığı, iç kafes yapılarını oluşturan elemanların kalınlığı ve uzunluğu değiştirilerek ağırlığı azaltılmış toplam 10 model oluşturulmuştur. Üst yapı olarak monolitik zirkonya kuronlar modellenmiştir. Oklüzal kuvvetler olarak 2. premolar ve 1. molar dişlerin fonksiyonel tüberküllerine 30° açılı 150 N değerinde oblik yük tek taraflı olarak uygulanmıştır. Altyapı materyalinin elastisite modülü arttıkça yüksek stres değerleri altyapıda konsantre olurken; abutment, oklüzal vida, implant ve implant çevresi kemikte oluşan stresler azalmıştır. Kafes içeren altyapıların dış duvar kalınlığı, iç kafes yapılarını oluşturan elemanların kalınlığından ve uzunluğundan daha etkili bir parametredir. Kafes tasarım optimizasyonu ile altyapı ağırlıkları %50'den fazla azaltılmasına rağmen stres değerleri sınırlar dahilinde kalmıştır.
Özet (Çeviri)
The aim of this study is to design more durable, lighter and cost-effective frameworks that can be produced with less material, using lattice structures as an alternative to implant-supported hybrid prosthesis frameworks in an atrophic edentulous jaw and to evaluate the stress values formed in these designs by 3D finite element stress analysis method. After modeling the atrophic maxilla, four implants were positioned by the All-on-four technique, axially in the lateral tooth region in the front and 30° distal in the posterior 2nd premolar region. Titanium and chromium-cobalt were used as framework material. A total of 10 models with reduced weight were created from the chromium-cobalt framework group by changing the lattice configuration (Body Centered Cubic, Face Centered Cubic), outer wall thickness, length and thickness of the elements forming the struts, with the lattice design optimization method. Monolithic zirconia crowns are modeled as the superstructure. As occlusal forces, an oblique load of 150 N at an angle of 30° was applied unilaterally to the functional tubercles of the 2nd premolar and 1st molar teeth. As the elasticity module of the framework material increases, high stress values are concentrated in the framework; the stresses on the abutment, occlusal screw, implant and peri-implant bone have decreased. The outer wall thickness of latticed frameworks is a more effective parameter than the thickness and length of the elements that make up the struts. Although the framework weights were reduced by more than 50% with the use of lattice design optimization, the stress values remained within the limits.
Benzer Tezler
- Atrofik mandibulada 'All-on-Four' konsepti ile alternatif tedavi protokollerinin sonlu elemanlar stres analizi yöntemi ile karşılaştırılması
Evaluation of stress distribution on All-on-Four concept and conventional implant designs: finite element analysis
İLHAN KAYA
Diş Hekimliği Uzmanlık
Türkçe
2017
Diş HekimliğiAnkara ÜniversitesiAğız, Diş ve Çene Cerrahisi Ana Bilim Dalı
PROF. DR. ESER FUNDA TUĞCU
- Farklı dizaynlara sahip total alloplastik temporomandibular eklem protezlerinin fossa ve kondil/ramus komponentlerine gelen stres dağılımlarının sonlu elemanlar analizi ile incelemesi
Finite element analysis of stress distributions on the fossa and condyle/ramus components of total alloplastic temporomandibular joint prostheses with different designs
SABUHI ABBASBAYLI
Diş Hekimliği Uzmanlık
Türkçe
2025
Diş HekimliğiAtatürk ÜniversitesiAğız, Diş ve Çene Cerrahisi Ana Bilim Dalı
DOÇ. DR. ERTAN YALÇIN
- Maksilla anterior bölge tek diş eksikliğinde dar çaplı implant ile rehabilite edilen vakalarda implant geometrisi ve yüzey tasarımının stres dağılımına etkisinin sonlu elemanlar analizi ile incelenmesi
Investigation of the effect of implant geometry and surface design on stress distribution with finite element analysis in cases rehabilitated with narrow-diameter implants a single missing tooth in the maxillary anterior region
AYŞEGÜL TEKELİ YAVUZ
Diş Hekimliği Uzmanlık
Türkçe
2022
Diş HekimliğiSelçuk ÜniversitesiAğız, Diş ve Çene Cerrahisi Ana Bilim Dalı
PROF. DR. ERCAN DURMUŞ
- Parafonksiyonel alışkanlık varlığında Le Fort I osteotomisi sonrası maksiller fiksasyonda kişiye özel titanyum ve CFR-PEEK miniplakların stres dağılımının sonlu elemanlar analizi ile değerlendirilmesi
Evaluation of stress distribution of custom-made titanium and CFR-peekminiplates in maxillary fixation after Le Fort I osteotomy in the presence of parafunctional habits using finite element analysis
DUYGU SARITEMUR
Doktora
Türkçe
2026
Diş Hekimliğiİstanbul Aydın ÜniversitesiAğız, Diş ve Çene Cerrahisi Ana Bilim Dalı
PROF. DR. MEHMET KAĞAN DEĞERLİYURT
- Rotasyonel giriş yollu hareketli bölümlü protezlerde retansiyon ve stabilite özelliklerinin bilinen protezlerle karşılaştırılması
The Comparison of the retention and stability properties of the removable partial dentures with rotational path of insertion with the conventional dentures
ŞULE İMREN ÜNAL
Doktora
Türkçe
2000
Diş HekimliğiAnkara ÜniversitesiProtetik Diş Tedavisi Ana Bilim Dalı
PROF. DR. AYHAN GÜRBÜZ