Farklı içeriklere sahip çimento esaslı kompozitlerin yüksek sıcaklığa karşı direnci ve yüksek sıcaklık sonrası davranışı
Resistance of cement-based composites with different contents to high temperature and behavior after high temperature
- Tez No: 894409
- Danışmanlar: PROF. DR. UMUR KORKUT SEVİM
- Tez Türü: Yüksek Lisans
- Konular: İnşaat Mühendisliği, Civil Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2024
- Dil: Türkçe
- Üniversite: İskenderun Teknik Üniversitesi
- Enstitü: Lisansüstü Eğitim Enstitüsü
- Ana Bilim Dalı: İnşaat Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 78
Özet
Beton etrafımızda sıklıkla gördüğümüz bir yapı malzemesidir. Beton dayanıklı bir yapı malzemesi olmasına rağmen betonun bozulmasına sebep olacak etkenlere maruz kaldığı zaman betonun dayanımında düşüşler meydana gelir. Yüksek sıcaklık, sülfat etkisi, donma-çözülme, asit ve tuz gibi etkenlerden dolayı betonun yapısında bozulmalar görülebilmektedir. Bu kapsamda olumsuz etkileri en aza indirgemek amacıyla günümüzde hala çalışmalar devam etmektedir. Bu çalışmalar hem sürdürülebilirlik hem de gelişen teknolojiyle birlikte daha dayanıklı beton elde edebilmek için önem arz etmektedir. Bu sebeplerle birlikte bu çalışmada betonun bozulmasına sebep olan yüksek sıcaklık karşısında betonun gösterdiği davranışlar, yüksek sıcaklık sonrası soğutma türlerinin önemi ve yüksek sıcaklık sonrası kürün numune davranışına etkisi araştırılmıştır. Bu kapsamda, su/çimento oranı 0,5 ve çimento dozajı 400 kg/m³ olarak belirlenen beton üretimi 5 farklı set 5 karışım olacak şekilde gerçekleştirilmiştir. 1. sette kontrol numuneleri üretilmiştir. İkinci, üçüncü ve dördüncü setlerde sırasıyla uçucu kül, yüksek fırın cürufu ve silika dumanı çimentonun ağırlığınca %15 oranında eklenerek üretim tamamlanmıştır. Polipropilen lif içeren numuneler ise 5. sette, toplam beton hacminin binde 5'i olarak katılmıştır. 28 gün kür süreleri tamamlanan numunelere oda sıcaklığında test çekici, ultrasonik ses hızı (UPV), su emme, kapilarite, aşınma ve basınç dayanımı deneyleri yapılmıştır. Beton numunelerinin yüksek sıcaklık karşısındaki ve sonrasındaki davranışlarının incelenebilmesi için numuneler 2 saat boyunca 4 farklı (200°C, 400°C, 600°C ve 800°C) sıcaklığa tabi tutulmuştur. Yüksek sıcaklık uygulamasından sonra numuneler, spreyleme ve kendi kendine soğuma gibi 2 farklı yöntemle soğutulmuş ve basınç dayanımları ölçülmüştür. Yüksek sıcaklığa maruz kalan beton numunelerinin 28 gün daha 2 farklı küre (su ve hava kürü) maruz bırakılarak basınç dayanımlarına olan etkileri araştırılmıştır. Elde edilen bulgulara göre, sıcaklığın artmasıyla birlikte tüm karışımlarda dayanım kayıpları artmıştır. Sonuçlar değerlendirildiğinde özellikle spreyleme metoduyla soğutulan numunelerde basınç dayanımı kaybı havada soğutulan numunelere göre daha fazla olmuştur. Yine çalışma sonucu elde edilen önemli sonuçlardan biri de karışıma eklenen polipropilen lif, uçucu kül, silika dumanı ve yüksek fırın cürufunun yukarıda bahsedilen kayıpları azaltmış olmasıdır. Ayrıca yüksek sıcaklık sonrası soğumuş durumdaki betonlara yapılan su kürünün yüksek sıcaklık nedeni ile meydana gelen dayanım kayıplarının bir kısmını telafi edebileceğini göstermektedir.
Özet (Çeviri)
Concrete is a building material that we often see around us. Although concrete is a durable building material, decreases in the strength of concrete occur when it is exposed to factors that will cause the deterioration of concrete. Due to factors such as high temperature, sulfate effect, freeze-thaw, acid and salt, deterioration of the structure of concrete can be observed. In this context, studies are still ongoing today in order to minimize the negative effects. These studies are important both for sustainability and for obtaining more durable concrete with developing technology. For these reasons, in this study, the behaviors of concrete in the face of high temperatures that cause the deterioration of concrete, the importance of cooling types after high temperatures and the effect of curing after high temperatures on sample behavior were investigated. In this context, the concrete production, the water / cement ratio is determined as 0.5 and the cement dosage is 400 kg / m3, has been carried out in such a way that there are 5 different sets of 5 mixtures. 1. control samples were produced in the set. In the second, third and fourth sets, respectively, fly ash, blast furnace slag and silica fume were added at a rate of 15% by weight of the cement and production was completed. Samples containing polypropylene fiber are 5. it was added to the set as 5 per thousand of the total concrete volume. room temperature test hammer, ultrasonic sound speed (UPV), water absorption, capillarity, abrasion and pressure resistance experiments were performed on the samples whose 28-day curing periods were completed. In order to examine the behavior of concrete samples against and after high temperature, the samples were subjected to 4 different temperatures (200°C, 400°C, 600°C and 800°C) for 2 hours. After high temperature application, the samples were cooled by 2 different methods such as spraying and self-cooling, and their compressive strength was measured. The effects of concrete samples exposed to high temperature on their compressive strength were investigated by exposing them to 2 different spheres (water and air cures) for another 28 days. According to the findings obtained, resistance losses increased in all mixtures with increasing temperature. When the results were evaluated, the loss of compressive strength was higher especially in the samples cooled by spraying method compared to the samples cooled in air. Again, one of the important results obtained as a result of the study is that the polypropylene fiber, fly ash, silica fume and blast furnace slag added to the mixture reduced the losses mentioned above. In addition, it shows that water curing on concretes that have cooled down after high temperatures can compensate for some of the strength losses caused by high temperatures.
Benzer Tezler
- Ultra yüksek performanslı çimento esaslı ağır kompozit malzemelerin radyasyon zırhlama özelliklerinin araştırılması
Investigation of radiation shielding properties of ultra high performance cement based heavy composite materials
MUZAFFER MANSUR TÜFEKÇİ
Doktora
Türkçe
2017
İnşaat MühendisliğiYıldız Teknik Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
YRD. DOÇ. DR. AHMET GÖKÇE
- Naylon esaslı liflerin çimento bağlayıcılı kompozitlerin özellikleri üzerine etkileri
Effect of naylon based fibers on the properties of cementitious composites
FARHAD EMAMI KHIAVI
Doktora
Türkçe
2017
İnşaat MühendisliğiGazi Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
PROF. DR. MUSTAFA ŞAHMARAN
- Yüksek fırın cürufunun beton durabilitesine etkisi
The effect of blast furnace slag on concrete durability
GÖKAY EĞİLMEZ
Yüksek Lisans
Türkçe
2004
İnşaat MühendisliğiYıldız Teknik Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
PROF. DR. FEVZİYE AKÖZ
- Kendiliğinden yerleşen betonlar'da kimyasal katkı ve çimentoların beton özelliklerine etkisi
The effects of chemical additives and cement on self-compacting concretes
BURAK İNAN
Yüksek Lisans
Türkçe
2017
İnşaat Mühendisliğiİstanbul Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
PROF. DR. FAHRİYE KILINÇKALE
- Genleştirilmiş kil agregalı taşıyıcı hafif betonların mekanik ve fiziksel özelliklerinin araştırılması
Investigation of mechanical and physical properties of expanded clay aggregate structural lightweight concrete
MUSTAFA USLU
Yüksek Lisans
Türkçe
2019
İnşaat MühendisliğiBayburt Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
DOÇ. DR. İLKER TEKİN