Sert krom kaplama parametrelerinin ferritik paslanmaz çeliğin yapısal, mekaniksel ve aşınma özelliklerine etkisi
Effect of hard chrome plating parameters on structural, mechanical and wear properties of ferritic stainless steel
- Tez No: 942872
- Danışmanlar: DOÇ. DR. YAKUP YÜREKTÜRK
- Tez Türü: Yüksek Lisans
- Konular: Metalurji Mühendisliği, Metallurgical Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2025
- Dil: Türkçe
- Üniversite: Bursa Teknik Üniversitesi
- Enstitü: Lisansüstü Eğitim Enstitüsü
- Ana Bilim Dalı: Metalurji ve Malzeme Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Metalurji ve Malzeme Mühendisliği Bilim Dalı
- Sayfa Sayısı: 63
Özet
Bir yüzeyin çevresel etkilerden korunabilmesi, sadece yüzey ile kalmayıp tüm bileşenin kullanım ömrünün uzatılabilmesi en önemli teknolojik ilerlemelerdendir. Elektrolitik sert krom kaplama, elektrik akımı ile çözünmüş metal katyonlarının bir elektrot üzerinde metal kaplama oluşturulması ile meydana gelmektedir. Sert krom kaplama yöntemi sergilemiş olduğu yüksek aşınma direnci, yüksek sertlik, düşük sürtünme katsayısı ile sanayide, özellikle otomotiv endüstrisinde, geniş bir kullanım alanına sahiptir. Bu çalışmada, farklı sert krom kaplama parametrelerinin (süre, akım) ferritik paslanmaz çelik (X2CrS13) üzerine biriktirilmesi ve bu parametrelerin yapısal, mekaniksel ve aşınma üzerindeki etkilerinin araştırılması amaçlanmıştır. Çalışma kapsamında dört farklı akım (1, 1,5, 2 ve 2,5 Amper) ve üç farklı süre (200, 250 saniye ve 300 saniye) seçilmiştir. SEM-EDS analizlerinde, tüm kaplama parametrelerinde sert krom kaplamanın başarıyla altlık malzemeye biriktirildiği gözlemlenmiştir. En yüksek kaplama kalınlığı, ~19,3 μm, akım ve zaman parametrelerinin en yüksek olduğu (2,5 Amper ve 300 saniye) L kodlu numunede elde edilmiştir. Sert krom kaplamada gözlemlenen mikro çatlakların kaplamanın en dış yüzeyinden itibaren başladığı ve altlık malzemeye kadar uzandığı görülmüştür. Kaplamadan altlık malzemeye kadar uzanan mikrosertlik sonuçlarında en yüksek kaplama kalınlığına sahip numune (L kodlu) için kaplamanın en dış yüzeyinin altlık malzemeden 9 kat civarı yüksek mikrosertliğe sahip olduğu görülmüş ve bu durum aynı zamanda aşınma direnci üzerinde de olumlu etki yapmıştır. Kademeli çizik testlerinde uygulanan yükün artması ile birlikte numune yüzeyindeki deformasyonların genişlediği gözlemlenmiştir. Sert krom kaplamayla birlikte aşınma direncinde yaklaşık 3 kata kadar bir artış elde edilmiştir.
Özet (Çeviri)
The capability to protect a surface from environmental effects, and to extend the life of not only the surface but also the entire component is one of the most important technological advances. Electrolytic hard chrome plating is obtained by creating a metal plating on an electrode with dissolved metal cations with electric current. The hard chrome plating has a wide range of uses in industry, especially in the automotive industry, due to its high wear resistance, high hardness and low friction coefficient. This study aimed to deposit different hard chrome plating parameters (time, current) on ferritic stainless steel (X2CrS13) and to investigate the effects of these parameters on structural, mechanical and wear. Four different currents (1, 1.5, 2 and 2.5 Ampere) and three different times (200, 250 seconds and 300 seconds) were decided on within the scope of the study. At SEM-EDS analyses, it was observed that the hard chrome plating was successfully deposited on the substrate material in all plating parameters. The highest plating thickness, ~19.3 μm, was obtained in the L-coded sample, which had the highest current and time parameters (2.5 Ampere and 300 seconds). It was observed that the microcracks in the hard chrome plating started from the outermost surface of the plating and extended to the substrate material. In the microhardness results extending from the plating to the substrate material, it was seen that the outermost surface of the plating for the sample with the highest plating thickness (L-coded) had a microhardness approximately 9 times higher than the substrate material, and this also had a positive effect on the wear resistance. In the progressive scratch tests, it was observed that the deformations on the sample surface widened with the increase in the applied load. With the hard chrome plating, the wear resistance has been improved by up to a factor of 3.
Benzer Tezler
- Sert krom kaplanan silindirik numunelerde kaplama parametrelerinin etkilerinin incelenmesi
Investigation of the effect of coating parameters in hard chrome coated cylindrical samples
HASAN KIR
Yüksek Lisans
Türkçe
2017
Metalurji MühendisliğiDüzce Üniversitesiİmalat Mühendisliği Ana Bilim Dalı
YRD. DOÇ. SERKAN APAY
- Çeliğin sert krom kaplanması ve çeşitli çalışma parametrelerinin kaplama kalitesine etkilerinin incelenmesi
The hard chromium plating of steel and examining the effect of various working parameters on the chromium plating quality
BAHAR SARIGÜL
- Sert krom kaplamada işlem parametrelerinin değiştirilmesinin kaplama üzerine etkilerinin araştırılması
Research for the effect of changing the procedure parameters on the plate during the hard chromium plating
SALİM KAVAK
Yüksek Lisans
Türkçe
2001
Metalurji MühendisliğiGazi ÜniversitesiMetal Eğitimi Ana Bilim Dalı
PROF. DR. MELİKE KABASAKALOĞLU
DOÇ. DR. BURHANETTİN İNEM
- Namlularda atış ömrünü etkileyen sert krom ve oksidasyon kaplama parametrelerinin karşılaştırılması
Comparison of hard chrome and oxidation coating parameters affecting the shooting life of barrels
ÖZGE ALKILINÇ
Yüksek Lisans
Türkçe
2021
Metalurji MühendisliğiMarmara ÜniversitesiMetalurji ve Malzeme Mühendisliği Ana Bilim Dalı
PROF. DR. SERDAR OSMAN YILMAZ
- The effect of process parameters on thickness and brightness of chromium plating
Krom kaplamada işlem parametrelerinin kaplama kalınlığı ve parlaklığına etkileri
BEYTULLAH ONAT
Yüksek Lisans
İngilizce
2004
Makine MühendisliğiÇukurova ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
PROF. DR. MELİH BAYRAMOĞLU