The investigation of success of computer glow curve deconvolution (cCGCD) by making numerical solutions of OTOR and IMTS models
Bilgisayar ile ışıldama eğrisi ayrışım (CGCD) yönteminin başarısının OTOR ve IMTS modellerinin nümerik çözümlerinin yapılarak araştırılması
- Tez No: 490096
- Danışmanlar: PROF. DR. AHMET NECMEDDİN YAZICI
- Tez Türü: Doktora
- Konular: Fizik ve Fizik Mühendisliği, Physics and Physics Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2017
- Dil: İngilizce
- Üniversite: Gaziantep Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Fizik Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: Belirtilmemiş.
Özet
Yapılan çalışmada birinci, ikinci ve genel-dereceden TL kinetik denklemleri ile OTOR (Bir-Tuzak Bir-Birleşme Merkezi) ve IMTS (Etkileşimli Çoklu Tuzak Sistemi) TL-Modelleri Matematika programı ile nümerik olarak çözülmüş ve yapay TL ışıldama eğrileri elde edilmiştir. Nümerik çözümlemelerde her seferinde bir kinetik parametre sabit tutulmuş, diğerleri değiştirilerek farklı kombinasyonlardan oluşan çok sayıda ışıldama eğrileri elde edilmiştir. Elde edilen tüm ışıldama eğrileri, bilgisayar ile ışıldama eğrisi (CGCD) yöntemi kullanılarak analiz edilmiştir. Analizlerde iki adet CGCD programı (GLOCANIN ve Microsoft Excel) kullanılmış ve analizler sonucunda CGCD programlarının sonuçları nümerik çözümlerde girilen kinetik parametreler ile karşılaştırılmış ve CGCD yönteminin başarısı araştırılmıştır. Ayrıca hangi programın diğerinden daha başarılı sonuçlar verdiği belirlenmiştir. Sonuçlar karşılaştırıldığında CGCD yönteminin başarısının TL-modellerinin nümerik çözümlemelerinde elektron geçiş katsayılarına (An/Ah) ve tuzak doluluk oranlarına (n0/Nt) bağlı olduğu görülmüştür. Yapılan araştırmalarda OTOR ve IMTS modellerinin nümerik çözümlemeleri sonucu elde edilmiş çoklu ışıldama tepesi içeren ışıldama eğrilerinin analizlerinin Microsoft Excel'de yazılmış CGCD programının GLOCANIN programından daha iyi sonuçlar verdiği gözlemlenmiştir. Yapılan çalışmalar sonucunda deneysel çalışmalar sonunda CGCD yöntemi ile kinetik parametrelerin daha güvenilir bulunabilmesi için tuzak doluluk oranının (n0/Nt) düşük olması gerektiği anlaşılmıştır. Bunun içinde düşük doz uygulamaları sonucunda TL-ışıldama eğrilerinin CGCD yöntemi ile analizi gerektiği sonucuna varılmıştır.
Özet (Çeviri)
In the study, OTOR (One-Trap One Recombination Center) and IMTS (Interactive Multiple Trap System) thermoluminescence (TL) rate equations, first, second and general-order TL kinetic equations were solved numerically with aid of Mathematica program and TL glow curves were obtained. In numerical solutions, one kinetic parameter is kept constant at each time, and by changing the others, a large number of TL glow curves composed of different combinations glow peaks were obtained. All of the numerically obtained glow curves were analyzed using the computerized glow curve deconvolution (CGCD) method. Two CGCD programs (GLOCANIN and Microsoft Excel) were used in the analyzing and the results of the CGCD programs were compared with the kinetic parameters entered in the numerical solutions and the success of the CGCD methods was investigated. It was also determined which program gave more successful results than the other. When the results were compared, it was seen that the success of the CGCD method depends on the electron transfer coefficients (An/Ah) and trap occupancy rates (n0/Nt) in the numerical solutions of TL-models. It has been observed in the researches that the CGCD program written in Microsoft Excel gives better results than the GLOCANIN program in the analysis of the luminescence curves including the multi-luminescence peak obtained as a result of numerical solutions of OTOR and IMTS models. As a result of the studies carried out, it has been understood that the trap occupancy rate (n0/Nt) must be low in order to make the kinetic parameters more reliable by the CGCD method after experimental studies. For this reason, with the results of low-dose applications, it has been concluded that the TL-luminescence curves must be analyzed by the CGCD method.
Benzer Tezler
- Dolgu malzemelerinin bitkilendirilmiş sistemlerde farklı çevresel parametrelere etkilerinin incelenmesi
Investigation of the effects of fillers on various envornmental parameters in planted systems
HASAN ÖZER
Doktora
Türkçe
2024
Çevre MühendisliğiSakarya ÜniversitesiÇevre Mühendisliği Ana Bilim Dalı
DOÇ. DR. ÖMER HULUSİ DEDE
- Fen eğitiminde bilgisayar destekli ve proje tabanlı öğretim yöntemlerinin akademik başarıya etkisinin ve öğrenci görüşlerinin incelenmesi
Investigation of the effect of computer assisted and project based teaching methods on academic success and student opinions in science education
TUĞBA PAK
Yüksek Lisans
Türkçe
2022
Eğitim ve ÖğretimErciyes Üniversitesiİlköğretim Ana Bilim Dalı
PROF. DR. HASAN KAYA
- Periyodik sistem ve kimyasal bağlar konularının öğretiminde bilgisayar destekli öğretimin 8. sınıf öğrencilerinin başarı ve tutumlarına etkisinin incelenmesi
Investigation of the effects on 8th grade students' academic success and attitude using computer supported teaching in periodical system and chemical bonds subjects
TUĞBA PAMUK
Yüksek Lisans
Türkçe
2018
Eğitim ve ÖğretimOrdu ÜniversitesiMatematik ve Fen Bilimleri Eğitimi Ana Bilim Dalı
PROF. DR. CENGİZ ÖZYÜREK
- Temel istatistik konularındaki bir bilgisayar yazılımının öğrencilerin başarı ve tutumlarına etkisinin incelenmesi
Investigation of the effects of basic statistics of student achievement and attitude of a computer program in the subject
ENES ABDURRAHMAN BİLGİN
Yüksek Lisans
Türkçe
2014
İstatistikYüzüncü Yıl ÜniversitesiOrtaöğretim Fen ve Matematik Alanlar Eğitimi Ana Bilim Dalı
YRD. DOÇ. DR. ERKAN ÇİMEN
- Gerçek çevre tabanlı dijital eğitsel oyunların İngilizce kelime bilgisi ile kalıcılığı üzerine etkilerinin incelenmesi
The investigation of authentic environmental based digital educational games on the success of English vocabulary and retention
EMRE GÜNEL
Yüksek Lisans
Türkçe
2019
Eğitim ve ÖğretimBolu Abant İzzet Baysal ÜniversitesiBilgisayar ve Öğretim Teknolojileri Eğitimi Ana Bilim Dalı
DOÇ. DR. ERCAN TOP