Ultrasonik yöntemle belirlenen malzeme sabitlerinin mekanik deneylerle doğrulanması
The verification of ultrasonically determined material constantsby mechanical experiments
- Tez No: 561709
- Danışmanlar: PROF. DR. HATİCE GÜZEL
- Tez Türü: Yüksek Lisans
- Konular: Eğitim ve Öğretim, Fizik ve Fizik Mühendisliği, Education and Training, Physics and Physics Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2019
- Dil: Türkçe
- Üniversite: Necmettin Erbakan Üniversitesi
- Enstitü: Eğitim Bilimleri Enstitüsü
- Ana Bilim Dalı: Ortaöğretim Fen ve Matematik Alanları Eğitimi Ana Bilim Dalı
- Bilim Dalı: Fizik Eğitimi Bilim Dalı
- Sayfa Sayısı: 60
Özet
Bu araştırma, E-cam/epoksi ve Karbon/epoksiden oluşan ortotropik kompozit plakalarda Young modülleri ve Poisson oranlarının çekme testi ile ölçülmesi amacıyla yapılmıştır. Çekme testi ile elde edilen esneklik katsayıları aynı malzemelerde ultrasonik yöntemle elde edilen esneklik katsayıları ile karşılaştırılmıştır. Araştırma 2015-2016 Öğretim yılında yapılmıştır. E-cam/epoksi ve Karbon/epoksi kompozit malzemeleri özel bir firmaya standartlara uygun olarak ürettirilmiştir. Tahribatlı yöntem olan çekme testi yöntemi ve tahribatsız yöntem olan ultrasonik yöntem ile elde edilen Young modülü ve Poisson oranı değerleri birbiriyle uyuşmaktadır. Çekme testi yöntemi ultrasonik yönteme göre daha zor ve karmaşık çalışmalar gerektirmektedir. En önemlisi çekme testi sonunda plakalar zarar görmektedir. Bu nedenle ultrasonik yöntemin tahribatlı yönteme göre daha avantajlı ve ucuz bir yöntem olduğu söylenebilir.
Özet (Çeviri)
The aim of this study is to measure Young's modulus and Poisson ratios of orthotropic composite plates consisting of E-glass / Epoxy and Carbon / Epoxy by tensile test. Elasticity coefficients of the same materials obtained by tensile test are compared with elasticity coefficients obtained by ultrasonic method. The research was conducted in 2015-2016 academic year. E-glass / epoxy and Carbon / Epoxy composite materials are manufactured in the standards to a private company. The results obtained by the method of tensile testing which is destructive method and ultrasonic method which is non - destructive method is in agreement. The tensile test method requires more difficult and complex studies than the ultrasonic method. Most importantly, the plates are damaged after the tensile test. Therefore, it can be said that ultrasonic method is a more advantageous and cheaper than destructive method.
Benzer Tezler
- Çeliklerde tane boyutunun ultrasonik yöntemle incelenmesi
Investigation of grain sizes of steels by ultrasonic method
AHMET DENİZ
Doktora
Türkçe
2012
Fizik ve Fizik MühendisliğiAfyon Kocatepe ÜniversitesiMetal Eğitimi Ana Bilim Dalı
PROF. DR. MEVLÜT DOĞAN
- Bazı ağaç türlerinin kesme modüllerinin ultrasonik ve statik yöntemlerle belirlenmesi
Determination of shear modulus of some wood species using ultrasonic and static test methods
MURAT AYDIN
Doktora
Türkçe
2018
Ağaç İşleriDüzce ÜniversitesiKompozit Malzeme Teknolojileri Ana Bilim Dalı
YRD. DOÇ. DR. HASAN HÜSEYİN CİRİTCİOĞLU
- Ultrasonic examination of resistance spot welds
Direnç punto kaynaklarının ultrasonik muayenesi
MEHMET SONAT
Yüksek Lisans
İngilizce
1999
Makine MühendisliğiOrta Doğu Teknik ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
PROF. DR. A. BÜLENT DOYUM
- Tarihi yapıların onarımına yönelik doğal taş tozu ile polimer bağlayıcılı harçların üretimi ve karakterizasyonu; Sille taşı örneği
Production and characterization of natural stone powder and polymer binding mortars for the repair of historic buildings; Sille stone example
AHMET CİHAT ARI
- Kompakt değişken kapasiteli kompresör için soğutma kapasitesi artışının sayısal ve deneysel incelenmesi
Numerical and experimental investigation of increasing cooling capacity for compact variable capacity compressor
SEMİH GÜREL
Yüksek Lisans
Türkçe
2018
Makine Mühendisliğiİstanbul Teknik ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
DR. ÖĞR. ÜYESİ SERTAÇ ÇADIRCI