Fiber ile güçlendirilmiş dentin kompozitinin posterior kompozit ile tamirinde farklı yüzey işlemlerinin etkilerinin incelenmesi
Evaluati̇on of the effects of different surface treatments on repair of fiber-reinforced dentin composite with posterior composite
- Tez No: 705753
- Danışmanlar: DOÇ. DR. OSMAN TOLGA HARORLI
- Tez Türü: Diş Hekimliği Uzmanlık
- Konular: Diş Hekimliği, Dentistry
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2021
- Dil: Türkçe
- Üniversite: Akdeniz Üniversitesi
- Enstitü: Diş Hekimliği Fakültesi
- Ana Bilim Dalı: Restoratif Diş Tedavisi Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 117
Özet
Amaç: Bu çalışmanın amacı fiber takviyeli dentin kompoziti yüzeyine uygulanan farklı yüzey işlemlerinin tamir bağlanma dayanımına etkilerini araştırmak ve dimetil sülfoksit (DMSO) uygulamasının adezyonu nasıl etkilediğini incelemektir. Yöntem: Klinikte yüksek çiğneme kuvvetleri altında kullanılması önerilen kompozit (EverX Posterior, GC, Europe) kullanılarak, 4x4x4 mm boyutlarında 40 adet kompozit rezin blok oluşturuldu. Numuneler yüzey hazırlama yöntemlerine göre 8 farklı gruba (n=5) ayrıldı; (G1) negatif kontrol grubu, (G2) adeziv uygulaması (G3) %50 dimetilsülfoksit uygulaması, (G4) % 50 dimetilsülfoksit + adeziv uygulaması, (G5) %37 fosforik asit etch+ adeziv uygulaması, (G6) air abrazyon+ adeziv uygulaması (G7) % 37 fosforik asit etch + %50 dimetilsülfoksit uygulaması + adeziv uygulaması, (G8) air abrazyon + %50 dimetilsülfoksit uygulaması + adeziv uygulaması grubu. Farklı yüzey hazırlama işlemi uygulanan kompozit örnekler akrilik içerisine gömüldü. Sonrasında, yüzeylere adeziv ajan (Single Bond Universal, 3M, ESPE, Neuss,Almanya), üretici firma önerilerine göre uygulandı. Adeziv uygulanan yüzeylere, silikon rehberler kullanılarak 4x4x4 mm boyutlarında olacak şekilde, bir posterior kompozit (Estelite Sigma Quick Posterior,Tokuyama,Tokyo, Japonya) ile iki tabaka halinde tamir işlemi yapıldı. Örneklerden su soğutması altında elmas testere ile 1x1x8 mm boyutlarında kompozit çubuklar elde edildi. Her gruptan mikro gerilim bağlanma dayanımı (μGBD) testi için toplam 20 kompozit çubuk rastgele seçildi. μGBD testi öncesi ,her kompozit çubuğun adeziv arayüzey alanı dijital kumpasla ölçüldü. Örnekler, siyanoakrilat yapıştırıcı ile mikro gerilim test cihazının test aparatına yapıştırıldı. 160 kompozit çubuğa, kopma gerçekleşene kadar, 50 kilogram (kgf) yük altında, 1,0mm/dk kafa hızında μGBD testi uygulandı. μGBD testi uygulanan örneklerin kopma yüzeyleri; kırılma tipini belirlemek için bir stereomikroskopta (x25) incelendi. Farklı yüzey işlemleri uygulanan kontrol (yalnızca frez uygulanan grup), %37 fosforik asit, air abrazyon ,dimetilsülfoksit , fosforik asit+DMSO ,air abrazyon+DMSO uygulanan altı adet kısa fiber destekli kompozit numune ve ayrıca suda yaşlandırılmamış ve hiçbir yüzey işlemi yapılmamış bir adet kısa fiber destekli kompozitlerin yüzey topoğrafyası taramalı elektron mikroskobu (SEM) analizi ile incelenmiştir. Yüzey işlemlerinin mikro tensile verilerinin normalliğini test etmek için Shapiro Wilk testi kullanıldı. ANOVA testi sonucunda grupların ortalama mikrotensile bağlanma değerleri arasında bir fark olduğu görüldü. Gruplar arası farklılıklar Tukey HSD testi ile belirlendi. Bulgular: En yüksek ortalama mikro gerilim bağlanma dayanımı değerleri sekizinci grupta (air abrazyon+ DMSO+ adeziv) kaydedilmiştir. Sadece frezle pürüzlendirme uygulanan negatif kontrol grubunda en düşük ortalama değerler saptanmıştır. Adeziv uygulanan tüm gruplarda istatistiksel olarak anlamlı μGBD değerleri elde edilmiştir. Negatif kontrol grubu en fazla adeziv başarısızlığın tespit edildiği grup olmuştur (%100). SEM görüntüleri incelendiğinde asit etch uygulamasının kompozit yüzeyindeki artıkları kısmen uzaklaştırdığı air abrazyon uygulamasının ise fiber yapılara yer yer zarar verdiği görüldü. Sonuç: Fiber ile güçlendirilmiş dentin kompozitinin posterior kompozit ile tamirinde adeziv uygulanan grupların negatif kontrol grubuna göre daha yüksek ortalama bağlanma dayanımı gösterdiği tespit edilmiştir. Adeziv uygulanmaksızın %50 DMSO uygulamasının istatistiksel olarak bağlantı başarısını artırmadığı saptanmıştır. Frez ile pürüzlendirilen fiber kompozit yüzeyinde asit etch ve air abrazyon uygulamaları sadece adeziv uygulanan grupla kıyaslandığında istatistiksel olarak anlamlı ilave bir katkı sağlamamıştır.
Özet (Çeviri)
Objective: The aim of this study is to investigate the effects of different surface treatments applied to the fiber reinforced dentin composite surface on the repair bond strength and to examine how dimethyl sulfoxide (DMSO) application affects the adhesion. Method: 40 composite resin blocks with 4x4x4 mm dimensions were formed by using composite (EverX Posterior,GC Europe), which is recommended to be used under high chewing forces in the clinic. The samples were divided into 8 different groups (n=5) according to the surface preparation methods; (G1) negative control group, (G2) adhesive application, (G3) 50% dimethylsulfoxide application ,(G4) 50% dimethylsulfoxide + adhesive application, (G5) 37% phosphoric acid etch+ adhesive application (G6) air abrasion + adhesive application, (G7) 37% phosphoric acid etch + 50% dimethylsulfoxide application + adhesive application, (G8) air abrasion + 50% dimethylsulfoxide application + adhesive application group. Composite specimens with different surface preparation processes were embedded in acrylic. Afterwards, an adhesive agent (Single Bond Universal, 3M, ESPE,Neuss,Germany) was applied to the surfaces according to the manufacturer's recommendations. The adhesive applied surfaces were repaired in two layers with a posterior composite (Estelite Sigma Quick Posterior,Tokuyama,Tokyo, Japan) 4x4x4 mm in size using silicone guides. Composite sticks with dimensions of 1x1x8 mm were cut with a diamond saw under water cooling. A total of 20 composite sticks were randomly selected for the microtensile bond strength (μTBS) test from each group. Before the μTBS test, the adhesive interface area of each composite bar was measured with a digital caliper. The samples were adhered to the test apparatus of the micro tensile tester with cyanoacrylate adhesive. The μTBS test was applied to 160 composite bars at a head speed of 1.0mm/min under 50 kilogram (kgf) load until failure occurred. The fracture surfaces of the specimens subjected to the μTBS test; examined under a stereomicroscope (x25) to determine the type of failure. Six short fiber reinforced composite samples applied with different surface treatments control (only the bur group), 37% phosphoric acid, air abrasion, dimethylsulfoxide, phosphoric acid+DMSO, air abrasion+DMSO, and one no storaged in water and no surface treatment applied short fiber reinforced composite samples' surface topography was investigated by scanning electron microscope (SEM) analysis. The Shapiro Wilk test was used to test the normality of the microtensile data of surface treatments. As a result of the ANOVA test, it was observed that there was a difference between the mean microtensil bond values of the groups. Differences between groups were determined by Tukey HSD test. Results: The highest average microtensile bond strength values were recorded in the eighth group (air abrasion + DMSO + adhesive). The lowest mean values were found in the negative control group, which was applied only with bur roughening. Statistically significant μTBS values were obtained in all adhesive-applied groups. The negative control group was the group in which the most adhesive failure was detected (100%). When the SEM images were examined, it was seen that the acid etch application partially removed the residues on the composite surface, while the air abrasion application damaged the fiber structures from place to place. Conclusion: In the repair of fiber reinforced dentin composite with posterior composite, it was detected that the adhesive applied groups showed higher average bond strength than the negative control group. It was noted that the application of 50% DMSO without the application of adhesive did not statistically increase the success of the bonding. Acid etch and air abrasion applications on the fiber composite surface roughened with the bur did not provide a statistically significant additional contribution when compared to the group in which only the adhesive was applied.
Benzer Tezler
- Fiberle güçlendirilmiş kompozit ve tam seramiklerde tamir dayancı üzerinde tamir materyallerinin ve ışık kaynaklarının etkilerinin incelenmesi
The effects of repair materials and light sources on the repair bond strength in fiber reinforced composite and all ceramics
TOLGA KÜLÜNK
Doktora
Türkçe
2006
Diş HekimliğiOndokuz Mayıs ÜniversitesiProtetik Diş Tedavisi Ana Bilim Dalı
DOÇ.DR. Y. ŞİNASİ SARAÇ
- Lazer uygulanmış kök kanalına farklı adeziv sistemler ile simante edilen cam fiber postların bağlantı dayanıklılığı ve mikrosızıntısı
Bond strength and microleakage of glass-fiber posts cemented with different adhesive systems on root canal walls treated with laser
ÖZGE PARLAR ÖZ
Doktora
Türkçe
2014
Diş HekimliğiGaziantep ÜniversitesiProtetik Diş Tedavisi Ana Bilim Dalı
DOÇ. DR. ASLI SEÇİLMİŞ
PROF. DR. Cemal AYDIN
- Fiber ile güçlendirilmiş kompozit rezinlerin fiziksel özelliklerinin ve bağlanma dayanımlarının değerlendirilmesi
Evaluation of physical properties and bond strength of fiber reinforced composite resins
CANSU DERDİYOK
Diş Hekimliği Uzmanlık
Türkçe
2022
Diş HekimliğiSivas Cumhuriyet ÜniversitesiÇocuk Diş Hekimliği Ana Bilim Dalı
PROF. DR. FATİH ÖZNURHAN
- İnley tutuculu cam fiber ile güçlendirilmiş kompozit sabit bölümlü protezlerin in-vivo ve in-vitro olarak karşılaştırmalı değerlendirilmesi
Comparative in-vivo and in-vitro evaluation of inlay retained glass fiber reinforced composite fixed partial dentures
MEHMET İZGİ
Doktora
Türkçe
2008
Diş HekimliğiEge ÜniversitesiProtetik Diş Tedavisi Ana Bilim Dalı
PROF. DR. GÖKHAN YILMAZ
- Porselen ve cam fiber ile güçlendirilmiş kompozit post sistemlerin diş dokularında oluşturdukları termal streslerin karşılaştırmalı olarak incelenmesi
Comperative evaluation of thermal stresses produced by glass fiber reinforced composite and zirconia posts on tooth structures
FERHAN EĞİLMEZ
Doktora
Türkçe
2007
Diş HekimliğiGazi ÜniversitesiProtetik Diş Tedavisi Ana Bilim Dalı
PROF.DR. LEVENT NALBANT