Estetik protetik materyallerin farklı çaptaki implantlar ve çevre kemikte oluşturduğu stres dağılımlarının sonlu elemanlar analiz yöntemi ile incelenmesi
Investigation of various esthetic prosthetic materials on implants of different diameters: A finite element analysis
- Tez No: 983855
- Danışmanlar: DOÇ. DR. ALPER ÖZDOĞAN
- Tez Türü: Doktora
- Konular: Diş Hekimliği, Dentistry
- Anahtar Kelimeler: Dental implant, estetik, seramik, sonlu elemanlar analizi, Ti-base abutment, zirkonya, Dental implant, esthetic, ceramic, finite element analysis, Ti-base abutment, zirconia
- Yıl: 2025
- Dil: Türkçe
- Üniversite: Atatürk Üniversitesi
- Enstitü: Sağlık Bilimleri Enstitüsü
- Ana Bilim Dalı: Protetik Diş Tedavisi Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: Belirtilmemiş.
Özet
Amaç: Bu çalışmanın amacı Ti-base abutment üzeri zirkonya koping tasarımların üst yapısında kullanılan farklı estetik materyallerin dar ve standart çaptaki implantlar ve çevre dokularında meydana getirebileceği stres ile gerilimlerin değerlendirilmesidir. Materyal ve Metot: Çalışmada 21 numaralı diş bölgesine 3.3 x12 mm ve 4.1 x12 mm bone level implant ve Ti-base abutment sanal ortamda orijinal boyutlarına göre modelize edildi. İki farklı çapta implant üzerine monolitik zirkon koping ve dört farklı kuron materyali tasarlandı. Modellere singulum bölgesinden oblik yönde 135º açı ile 100 N ve vertikal yönde 100 N kuvvet uygulanarak 8 farklı model ve 16 analiz grubu oluşturuldu. İmplant gövdesi, Ti-base abutment, abutment vidası ve kuron üzerindeki von Mises stres değerleri ile stres dağılımları incelendi. Kuronların, kortikal ve trabeküler kemiklerin maksimum ve minimum principal stres değerleri ile çekme ve basma gerilimleri incelendi. Bulgular: Oblik kuvvet uygulama sonucunda tüm modellerde vertikal kuvvet uygulama koşuluna göre daha yüksek stres değerleri gözlendi. Dar çapta implant modellerindeki stres değerleri standart çap modellerinden daha yüksek bulundu. Kuron materyaline göre en yüksek stres değerleri zirkonya kullanılan modellerde, en düşük stres değerleri ise lityum disilikat kullanılan modellerde izlendi. Estetik protetik materyal değişikliğinin kortikal ve trabeküler kemik üzerindeki maksimum ve minimum principal stres değerlerinde herhangi bir değişiklik oluşturmadığı gözlendi. Sonuç: İmplant çapının azalması ve oblik kuvvet uygulaması ile tüm stres değerlerinin artışına sebep olduğu gözlemlendi. Üst yapıda kullanılan materyalde elastisite modülü arttıkça stres değerlerinin arttığı bu durumun dar çaplı implant modellerinde daha fazla olduğu gözlemlendi. Bu bulgular dar çapta implant kullanımı gerektiğinde vaka seçiminin hassasiyetini göstermektedir. Ayrıca stres değerlerinin vida ve implant düzeyinde azalmış olması da Ti-base'in mekanik performansını göstermektedir.
Özet (Çeviri)
Aim: The aim of this study was to evaluate the stress and strain induced in narrow and standard diameter implants and their surrounding tissues by different aesthetic materials used in the superstructure of zirconia coping designs over Ti-base abutments. Material and Method: In this study, 3.3 x 12 mm and 4.1 x 12 mm bone level implants and Ti-base abutments were modeled in a virtual environment according to their original dimensions in the region of tooth number 21. Monolithic zirconia copings and four different crown materials were designed on the two different implant diameters. Eight distinct models and 16 analysis groups were created by applying a 100 N force at a 135º angle from the cingulum area and a 100 N vertical force to the models. The von Mises stress values and stress distributions on the implant body, Ti-base abutment, abutment screw, and crown were examined. The maximum and minimum principal stress values, as well as the tensile and compressive stresses, in the cortical and trabecular bones surrounding the crowns were examined. Conclusion: It was observed that a decrease in implant diameter and the application of oblique force led to an increase in all stress values. Furthermore, it was noted that as the modulus of elasticity of the material used in the superstructure increased, the stress values also increased, a condition which was more pronounced in narrow-diameter implant models. These findings highlight the critical importance of case selection when the use of narrow-diameter implants is necessary. Additionally, the reduction in stress values at the screw and implant level demonstrates the favorable mechanical performance of the Ti-base abutment.
Benzer Tezler
- PEEK, PEKK, fiber ve zirkonyum oksit'den üretilmiş post-kor materyallerinin bağlanma dayanımlarının değerlendirilmesi
Evaluation of bonding strengths of POST-CORE materials made from PEKK, PEKK, fiber, and zirconium oxide
ŞERİFE KÖLE
Doktora
Türkçe
2022
Diş HekimliğiGazi ÜniversitesiProtetik Diş Tedavisi Ana Bilim Dalı
PROF. DR. GÜLFEM ERGÜN
- Farklı protetik estetik materyallerin translüsensi değerleri ve iki farklı adeziv siman sistemiyle bağlanma dirençlerinin karşılaştırılması
Comparison of translucency and bond strength values of different aesthetic prosthetic materials with two different adhesive resin cement systems
İREM ÖZKAN
Diş Hekimliği Uzmanlık
Türkçe
2021
Diş Hekimliğiİzmir Katip Çelebi ÜniversitesiProtetik Diş Tedavisi Ana Bilim Dalı
DOÇ. DR. SÜLEYMAN AGÜLOĞLU
- ER,CR:YSGG lazer uygulamasının farklı protetik estetik materyallerin adeziv rezin sistemlerle dişe bağlanma dayanımına etkisinin değerlendirilmesi
Evaluation of the effect of ER, CR: YSGG laser on the bond strength of adhesive resin systems with different prosthetic aesthetic materials
JAVID ISMAYILOV
Doktora
Türkçe
2025
Diş Hekimliğiİzmir Katip Çelebi ÜniversitesiProtetik Diş Tedavisi Ana Bilim Dalı
PROF. DR. SÜLEYMAN AGÜLOĞLU
- Farklı protetik materyallerin tamirinde kullanılan tek-renkli kompozit rezinlerin optik özelliklerinin değerlendirilmesi
Evaluation of optical properties of single-color composite resins used in repair of different prosthetic materials
İLAYDA AYVAZ
Diş Hekimliği Uzmanlık
Türkçe
2024
Diş HekimliğiPamukkale ÜniversitesiProtetik Diş Tedavisi Ana Bilim Dalı
DOÇ. DR. IŞIL KARAOKUTAN
- Nikotin ile muamele edilmiş farklı implant destekli geçici protetik materyallerin insan gingival fibroblastlarına etkisi
Effect of different nicotine-treated implant supported provisional prosthetic materials on human gingival fibroblasts
AHMET OĞUZ AYDOĞDU
Doktora
Türkçe
2025
Diş HekimliğiSelçuk ÜniversitesiProtetik Diş Tedavisi Ana Bilim Dalı
PROF. DR. İSA YÖNDEM
PROF. DR. SEMA HAKKI