Dış cephe ısı yalıtımı sıvalı kompozit sisteminde bağlantı elemanı olarak kullanılan dübellerin aderans kuvveti
Pull-out forces of fixing components used in external thermal insulation composite system with rendering
- Tez No: 223838
- Danışmanlar: PROF.DR. CANAN TAŞDEMİR
- Tez Türü: Yüksek Lisans
- Konular: İnşaat Mühendisliği, Civil Engineering
- Anahtar Kelimeler: Dıs cephe ısı yalıtımı sıvalı kompozit sistemleri, Plastik Dübel, Aderans kuvveti, ETAG 014, External Thermal Insulation Composite System with Rendering, PlasticAnchor, Pull-out Strength, ETAG 014
- Yıl: 2006
- Dil: Türkçe
- Üniversite: İstanbul Teknik Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: İnşaat Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Yapı Mühendisliği Bilim Dalı
- Sayfa Sayısı: 77
Özet
Bu çalısmada, dıs cephe ısı yalıtımı sıvalı kompozit sistemlerinde kullanılan baglantıelemanları olan plastik dübellerin mekanik özeliklerinin arastırılmıstır. Bu amaçlaplastik dübellerin aderans kuvvetlerini ve dübel çivilerinin çekme dayanımlarınıbulmaya yönelik deneyler gerçeklestirilmistir. Yapılan deneylerde, düsük (C10), orta(C20) ve yüksek (C50) dayanımlı olmak üzere üç farklı beton sınıfı ve gazbetonkullanılmıstır. Beton yüzeylerdeki deneyler, gazbeton hariç, iki seri halindegerçeklestirilmistir. lk seri betonun erken yaslarında yapılırken, ikinci seri ise betondayanımını aldıktan sonra gerçeklestirilmistir. Her bir yüzeyde 95 mm, 115 mm ve 135mm olmak üzere farklı boylarda ve plastik ve çelik çivili olmak üzere farklı türdeplastik dübeller test edilmistir. Sonuç olarak, yapılan çalısmada dübellerin aderanskuvvetinde özellikle tırnak tasarımının ve malzeme kalitesinin önemli oldugubulunmustur.
Özet (Çeviri)
In this study, mechanical behavior of plastic anchors which are used as fixingcomponent in the external thermal insulation composite system with rendering wereinvestigated. For this purpose, tests are carried out to find the pull-out forces of anchorsand tensile strength of plastic nails. In the tests three different concrete class; lowstrength (C10), normal strength (C20) and high strength (C50) concretes and autoclavedaerated concrete were used. The investigations on the concrete surfaces, exceptautoclaved aerated concrete, were done in two series. The first of test series were done atthe early age of concrete, while the second series of tests were done after the concretereached its expected strength. On each surface, different lengths of anchors as 95 mm,115 mm and 135 mm and different types of anchors as anchors with plastic nail andanchors with steel nail were tested. In conclusion, it is determined that nail design andmaterials property affects the mechanical behavior of fixing component.
Benzer Tezler
- Bina dış cephe yalıtım malzemesi üretiminde mikaşistlerin kullanımı ve elde edilen malzemenin termo-fiziksel performansının araştırılması
The usage of micaschists in production of building external isolation material and the investigation of the thermo-physical performance of the final product
MUHAMMED ZİYA KARATAŞ
Yüksek Lisans
Türkçe
2016
Jeoloji MühendisliğiKahramanmaraş Sütçü İmam ÜniversitesiMalzeme Bilimi ve Mühendisliği Ana Bilim Dalı
YRD. DOÇ. DR. TAMER RIZAOĞLU
- Dış cephe ısı yalıtım (mantolama) işlerinde iş sağlığı ve güvenliği uygulamalarına ilişkin bir irdeleme
Exterior heat insulation works(sheati̇ng)an assessment on occupational health and safety practices
HÜSEYİN SANCAK
Yüksek Lisans
Türkçe
2019
Sağlık EğitimiÜsküdar Üniversitesiİş Sağlığı ve Güvenliği Ana Bilim Dalı
DR. ÖĞR. ÜYESİ ESİN TÜMER
- Çok katlı betonarme yapıların dış cephe ısı yalıtım maliyetlerinin tahmini: Bir model örneği
Estimation of exterior thermal insulation costs of multi-storey reinforced concrete buildings: A model example
MERVE ARSLAN KAPUCU
Yüksek Lisans
Türkçe
2024
İnşaat MühendisliğiDüzce Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
DOÇ. DR. LATİF ONUR UĞUR
- Investigation of the thermal performance of zeolite as an insulation material for external walls of a construction
Yapı dış duvarlarında yalıtım malzemesi olarak kullanılabilecek zeolitin termal performansının araştırılması
ELİF TELEFONCU
Yüksek Lisans
İngilizce
2019
İnşaat MühendisliğiGaziantep Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
PROF. DR. ABDULKADİR ÇEVİK
DOÇ. DR. ADEM ATMACA
- Polymer/glass nanocomposite fiber as an insulating material
Yalıtım malzemesi olarak polimer/cam nanokompozit fiber üretimi
CEMRE İPEK AKKAYA
Yüksek Lisans
İngilizce
2016
Kimya Mühendisliğiİstanbul Teknik ÜniversitesiKimya Mühendisliği Ana Bilim Dalı
PROF. DR. SADRİYE KÜÇÜKBAYRAK